Cruisers Forum

Join CruisersForum Today

Thread Tools Rate Thread Display Modes
Old 27-01-2016, 18:54   #1
Registered User

Join Date: May 2013
Location: st.petersburg florida
Boat: Compass 47
Posts: 2
weaver porthole replacement seals

Can anyone recommend a supplier of replacement seals for older Weaver NZ manufactured portholes. Apparently they were taken over by Maxwell years ago and now they are Vetus/Maxwell marine, but they do not have any stock in USA. It is a rectangular extrusion of approx 5mm x 15mm, and is bevelled on one edge. How does one bend rectangular rubber to make the round corners on this porthole?
Any info will help thank you!!
captarno is offline   Reply With Quote

men, seals

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
To Porthole Or Not To Porthole... Captain Pappy Liveaboard's Forum 11 22-04-2014 18:08
Porthole seals Atraxia Construction, Maintenance & Refit 18 11-08-2013 13:12
shaft seals, lip seals,..oh my sailorboy1 Propellers & Drive Systems 50 04-03-2013 18:50
EPDM Lewmar port seals (replacement) for leaking seals Panamajames Construction, Maintenance & Refit 3 05-03-2012 12:47
Bronze Porthole Glass Replacement - Any Tips ? David_Old_Jersey Construction, Maintenance & Refit 3 26-09-2011 05:49

Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -7. The time now is 23:50.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2018, vBulletin Solutions, Inc.

ShowCase vBulletin Plugins by Drive Thru Online, Inc.