Wanted: B&G Impeller Spares Kit for Harrier Speed Sensor

[Pleiades]

I need to replace the impeller housing on by old B&G "grey box" Harrier speed sensor and would appreciate any help to locate one.

B&G Speed Sensor Part Number 117-00-120 (31 mm dia) (circa 1974)
Impeller Spares Kit 110-10-B21 (white plastic with black impeller)

The part I'm looking for is depicted on page 2 of the following link:


http://www.bandg.com/pdfs/identguide.pdf

I need the white plastic housing that holds the impeller

Many thanks for any leads to source this item.

John

[Charlie]

Hi John:

I believe that I emailed you when we were looking at a Swan 41 a couple of years ago. We ended up buying a Sceptre 41 that was located up the Fraser River instead. We still have the boat up in Canada (We live in California). In two weeks we'll be leaving Sidney headed for Desolation Sound. With all the books that I've studied it seems like it is pretty hard to go wrong with any place we go but I was wondering if you had any recommendations for "can't miss" spots.

[Sandero]

I have a bunch of them... email of PM me. Can't you get them B&G?

The replacement part includes the white plastic and the black 3 blade impeller. There are 2 black plastic screws which you use to attach the assemble to the transducer.

Jef
SV Shiva

[Pleiades]

I'm back looking for B&G impellers again. Do you still have some?

John

[Némon]

Hi - I am also looking for the Impeller - I have asked B&G but they told me they can't help; would you still have them??? thx!!

[Kinder65]

Looks like these posts are a few yrs old, but I am also in need of the B&G (Part No. 117-00-120) Speedo: Its completely missing the impeller so I assume I just need the Impeller Spares Kit 110-10-B21 but will consider a complete replacement unit as well. DOes anyone have one of these or know where I can get the kit or a compatible eplacement unit?

[jjwull]

Hello do you still have one of them ? regards jerzy

Originally Posted by Sandero

I have a bunch of them... email of PM me. Can't you get them B&G?

The replacement part includes the white plastic and the black 3 blade impeller. There are 2 black plastic screws which you use to attach the assemble to the transducer.

Jef
SV Shiva