I've spent an hour searching with no luck so now it's time to post...
I'm doing maintenance
on my CS22 swing keel
, the boat is new-to-me and the underside needs alittle TLC. There`s a fair bit of play (shown in the attached video) in the keel
, likely where the pin goes through. My question is this: is it possible to remove the pin to pull the swing keel out without dropping the entire ballast? I`m assuming I need to remove the bolt holding the pivot pin in place but have no idea how to go about doing that. I can`t seem to find any information on what I`m trying to do anywhere, so any help would be appreciated.