Cruisers Forum
 


Join CruisersForum Today

Reply
 
Thread Tools Rate Thread Display Modes
Old 09-06-2014, 21:16   #1
Registered User
 
bbowers2004's Avatar

Join Date: May 2013
Location: Bahmamas
Boat: Westerly Centaur 26'
Posts: 298
Send a message via AIM to bbowers2004 Send a message via MSN to bbowers2004 Send a message via Yahoo to bbowers2004 Send a message via Skype™ to bbowers2004
Standing Rigging - Production Boats

I found a neat little PDF for running rigging for production boats.

https://drive.google.com/file/d/0ByF...it?usp=sharing

I can not find this same example for standing rigging, can someone point me in the right direction? Or is there a reason I can't find it.
__________________
"My goal in sailing isn't to be brilliant or flashy in individual races, just to be consistent over the long run." - Dennis Conner
Follow our Globe Circumnavigation:
http://jillionsvoyage.blogspot.de/
bbowers2004 is offline   Reply With Quote
Old 09-06-2014, 23:25   #2
Senior Cruiser
 
Jim Cate's Avatar

Cruisers Forum Supporter

Join Date: May 2008
Location: cruising SW Pacific
Boat: Jon Sayer 1-off 46 ft fract rig sloop strip plank in W Red Cedar
Posts: 11,467
Re: Standing Rigging - Production Boats

i've never seen such a table for standing rigging either. I suspect that the reason is that running rigging lengths are not critical and the materials are fairly inexpensive, so buying a bit extra is easy.

Standing rigging needs to be correct within a couple of inches max, the terminals are difficult or impossible to change, and the materials are pretty dear. Simply changing out some rigging screws can make a fatal difference in a "Standard" length, for instance. One really needs to measure one's specific vessel to be sure.

Cheers,

Jim
__________________
Jim and Ann s/v Insatiable II , lying Port Cygnet, Tasmania once again
Jim Cate is online now   Reply With Quote
Reply

Tags
rigging

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Rigging instructions for the standing rigging of the 321 Oceanis anadale1 Deck hardware: Rigging, Sails & Hoisting 0 20-06-2011 16:52
Re: Rigging, Compression Fittings for Standing Rigging Maineiac_sailor Deck hardware: Rigging, Sails & Hoisting 2 26-01-2011 08:30
Synthetic standing rigging roblanford Deck hardware: Rigging, Sails & Hoisting 33 31-12-2008 21:11
Standing Rigging Bill Balme Construction, Maintenance & Refit 8 25-11-2005 05:37
Standing Rigging Pa La O La Multihull Sailboats 6 28-07-2005 13:50



Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -7. The time now is 12:42.


Google+
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.

ShowCase vBulletin Plugins by Drive Thru Online, Inc.