Cruisers Forum
 


Join CruisersForum Today

Reply
 
Thread Tools Rate Thread Display Modes
Old 04-04-2011, 12:30   #1
Registered User

Join Date: Apr 2011
Location: Netherland
Boat: Taswell
Posts: 3
Question st 50 instruments

My navigation instruments, autohelm st 50, get bat lcd screens.
Do you have same experience and have solved it?
__________________

__________________
Stamper is offline   Reply With Quote
Old 04-04-2011, 17:20   #2
Senior Cruiser

Cruisers Forum Supporter

Join Date: Aug 2009
Location: between the devil and the deep blue sea
Boat: a sailing boat
Posts: 17,314
Re: st 50 instruments

We replaced the instruments with ST40.

b.
__________________

__________________
barnakiel is offline   Reply With Quote
Old 05-04-2011, 06:44   #3
Moderator Emeritus
 
GordMay's Avatar

Join Date: Mar 2003
Location: Thunder Bay, Ontario - 48-29N x 89-20W
Boat: (Cruiser Living On Dirt)
Posts: 31,574
Images: 240
Re: st 50 instruments

Greetings and welcome aboard the CF, Stamper.

What are "bat lcd screens"?
__________________
Gord May
"If you didn't have the time or money to do it right in the first place, when will you get the time/$ to fix it?"



GordMay is online now   Reply With Quote
Old 05-04-2011, 07:03   #4
Registered User

Join Date: Apr 2011
Location: Netherland
Boat: Taswell
Posts: 3
Re: st 50 instruments

bat was a writing mistake. It must be BAD.
The screens gets black so reading them is impossible
wolfgang Reneman
__________________
Stamper is offline   Reply With Quote
Old 05-04-2011, 07:04   #5
Registered User

Join Date: Apr 2011
Location: Netherland
Boat: Taswell
Posts: 3
Re: st 50 instruments

Thank you,
Can you use the same transducer and wind top gear?
reards, wolfgang reneman
__________________
Stamper is offline   Reply With Quote
Old 05-04-2011, 07:18   #6
Moderator Emeritus
 
GordMay's Avatar

Join Date: Mar 2003
Location: Thunder Bay, Ontario - 48-29N x 89-20W
Boat: (Cruiser Living On Dirt)
Posts: 31,574
Images: 240
Re: st 50 instruments

A “black” screen might indicate electrical power failure, or total instrument failure.
The “SeaTalk” power supply is on the Red (V+) and Screen (V0) wires. The yellow wire is “data”.

Hete are the Manuals for the (retired) ST-50 Instruments
Raymarine Marine Electronics - Retired ST50 Manuals
__________________

__________________
Gord May
"If you didn't have the time or money to do it right in the first place, when will you get the time/$ to fix it?"



GordMay is online now   Reply With Quote
Reply

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Mahe 36: Instruments jean1146 Fountaine Pajot 123 05-04-2017 23:47
How to Connect All These Instruments ? George64 OpenCPN 11 13-09-2010 03:37
Help! Which ST60 Instruments ? Eddie Marine Electronics 5 26-03-2010 07:42
B&G Instruments Bob G Construction, Maintenance & Refit 5 31-10-2009 09:58
I have 3 transducers, without instruments. pogo Marine Electronics 1 06-01-2008 20:36



Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -7. The time now is 03:56.


Google+
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.

ShowCase vBulletin Plugins by Drive Thru Online, Inc.