SS Pulpit and Pushpit

[Jay Knight]

My stainless bow pulpit is damaged from Katrina and I am considering having a new one made, same for the stern rail. Any body have any experience with a firm that can produce a quality stainless work?

Thanks
Jay

[Pura Vida]

I've never used them but I know a few satisfied people who have. Where is the boat?

Tops-N-Towers, Sportfishing Central

[mike d.]

if your pulpit and or stern rail are still intact but some of it them is bent why not get a price/find someone to fix the damaged sections only. i did this up-here in the N.E. and saved half over new fab. they just cut out the bad section welded in new tube and then sent it out for polishing. other than a very slight wave in the finish you cannot tell it was sectioned. if you check other boats carefully you will see that even reputable co. products are done this way!

[cnj]

mike d is right sometimes thay can be fixed. but as this is what i do for a living
it may not always be possabul , at my shop we do all the polishing in house
and you will not find the seam.