Source Wood Cabinet Door Hole Molding

Stevens 47 · 20-10-2009, 09:05

I am looking for a source for Teak door hole molding. This is a turned piece of wood that is glued into the finished door panel. To open the door one puts their finger into the hole locates the brass elbow catch, releases it and the door opens...very simple and low tech. I have tried Jamestown, H&L and all of my hardwood suppliers. Does anybody have a idea of a supplier.

sabray · 20-10-2009, 09:20

Drawer/finger pulls, Drawer knob, Cross grain finger pull, Finger pulls, Cabinet drawer pull

S&S · 20-10-2009, 09:24

jamestown distributors sells them also.

Blue Stocking · 20-10-2009, 09:31

Hamilton Marine Southport Maine
AFI # 60146
Ham Mar # 101054

Not Sure · 22-10-2009, 10:12

You may have to have one made, or make it yourself. Generally those types of items are not a 'stock' size like the door hardware on a house. Look for a local cabinetmaker, as they should be able to advise you properly on the scope and procedure for the job.

Stevens 47 · 22-10-2009, 20:04

Quote:

You may have to have one made, or make it yourself. Generally those types of items are not a 'stock' size like the door hardware on a house.

Sabray's link did the trick. Drawer/finger pulls, Drawer knob, Cross grain finger pull, Finger pulls, Cabinet drawer pull

Thanks for that Sabray

20-10-2009, 09:05	#1
Stevens 47 Registered User Join Date: Aug 2006 Location: Encinitas, California Boat: Stevens 47 47 feet Lumia Posts: 256	Source Wood Cabinet Door Hole Molding I am looking for a source for Teak door hole molding. This is a turned piece of wood that is glued into the finished door panel. To open the door one puts their finger into the hole locates the brass elbow catch, releases it and the door opens...very simple and low tech. I have tried Jamestown, H&L and all of my hardwood suppliers. Does anybody have a idea of a supplier.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Underwater Cabinet Meeting	GordMay	Indian Ocean & the Red Sea	15	17-10-2009 15:13
Door Latches	Don Lucas	Construction, Maintenance & Refit	5	09-06-2009 09:30
sliding door	tolly	Multihull Sailboats	19	14-12-2008 22:52
Door hardware	mikereed100	Construction, Maintenance & Refit	4	29-05-2008 20:38

20-10-2009, 09:20	#2
sabray Registered User Join Date: Aug 2008 Boat: corsair f-27, PETERSON 44 Posts: 223	Drawer/finger pulls, Drawer knob, Cross grain finger pull, Finger pulls, Cabinet drawer pull

20-10-2009, 09:24	#3
S&S Registered User Join Date: Jul 2009 Boat: 48' 1963 S&S yawl Posts: 560	jamestown distributors sells them also.

20-10-2009, 09:31	#4
Blue Stocking Registered User Join Date: Dec 2008 Boat: Rhodes Reliant 41ft Blue Stocking Posts: 251	Hamilton Marine Southport Maine AFI # 60146 Ham Mar # 101054

22-10-2009, 10:12	#5
Not Sure Registered User Join Date: Sep 2009 Location: the golden state Boat: pilot cutter Posts: 135	You may have to have one made, or make it yourself. Generally those types of items are not a 'stock' size like the door hardware on a house. Look for a local cabinetmaker, as they should be able to advise you properly on the scope and procedure for the job.