Cruisers Forum
 


Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on Cruisers Forums. Advertise Here
 
Thread Tools Search this Thread Rate Thread Display Modes
Old 06-11-2013, 10:11   #361
Registered User
 
Bluewaters2812's Avatar

Join Date: Sep 2012
Location: UK
Boat: Van De Stadt Excalibur 36
Posts: 915
Images: 1
Send a message via Skype™ to Bluewaters2812
Re: Rudder nightmare at sea

Quote:
Originally Posted by HappyMdRSailor View Post
Good stuff Bluewaters... My participation in the discussion has been limited by the "sailing wifi blues"! (but most of us prefer the isolation... albeit frustration when we need connection for times like this!)

Glad things are going your way!!!

Next posts are not to lead from the progression and outcome of your plight, but for informative discussion...

Good luck my friend!
Thanks for the good wishes.
Bluewaters2812 is offline   Reply With Quote
Old 06-11-2013, 10:18   #362
Registered User
 
Bluewaters2812's Avatar

Join Date: Sep 2012
Location: UK
Boat: Van De Stadt Excalibur 36
Posts: 915
Images: 1
Send a message via Skype™ to Bluewaters2812
Re: Rudder nightmare at sea

Would anyone agree with giving the rudder a light sanding before treating with a coat of primer before then applying 2 coats of anti-fouling?
Bluewaters2812 is offline   Reply With Quote
Old 06-11-2013, 10:48   #363
Moderator Emeritus
 
HappyMdRSailor's Avatar

Cruisers Forum Supporter

Join Date: May 2008
Location: Fort Lauderdale, FL
Boat: 48 Wauquiez Pilot Saloon
Posts: 5,975
Re: Rudder nightmare at sea

Quote:
Originally Posted by Bluewaters2812 View Post
Would anyone agree with giving the rudder a light sanding before treating with a coat of primer before then applying 2 coats of anti-fouling?
Hi Everybody...

My name is Ed, and I too am a member of BSA (Bottom Sanders Anonymous)

I would like to avoid enabling you to spiral into our club, but I can't help but recommend that you too scuff up the new underwater appendage...

Sand away my friend.... Sand away...........
__________________
In the harsh marine environment, something is always in need of repair...

Mai Tai's fix everything...
HappyMdRSailor is offline   Reply With Quote
Old 06-11-2013, 12:03   #364
Registered User
 
Zanshin's Avatar

Join Date: Feb 2007
Location: Caribbean
Boat: Jeanneau 57
Posts: 2,280
Images: 2
Re: Rudder nightmare at sea

Quote:
Originally Posted by CaribbeanCraig View Post
Has anyone tried reefing the main and using it for steering while under diesel propulsion ?
In calmer seas of course . just curious .
Yes, I tried that when I had no rudder. No chance of keeping a heading while at sea. Remember, things are very different when you have a rudder that is locked (preferably midships) and no rudder at all on a fin keel. Any change in balance between forces ahead of the keel and behind the keel result in immediate course changes.
__________________
Zanshin sailing
Zanshin is online now   Reply With Quote
Old 06-11-2013, 12:15   #365
Registered User

Join Date: Nov 2013
Location: San Juan, PR
Posts: 95
Re: Rudder nightmare at sea

Quote:
Originally Posted by Zanshin View Post
Yes, I tried that when I had no rudder. No chance of keeping a heading while at sea. Remember, things are very different when you have a rudder that is locked (preferably midships) and no rudder at all on a fin keel. Any change in balance between forces ahead of the keel and behind the keel result in immediate course changes.
Ok ..Thanks Z

What about a ketch rig ? possible ..?
CaribbeanCraig is offline   Reply With Quote
Old 06-11-2013, 12:19   #366
Registered User
 
Zanshin's Avatar

Join Date: Feb 2007
Location: Caribbean
Boat: Jeanneau 57
Posts: 2,280
Images: 2
Re: Rudder nightmare at sea

a Ketch or Yawl might balance, since the jib or genoa is in front of the keel and the mizzen is behind the keel, giving some dynamic stability. But I haven't tried it so can't comment from experience. But the reality is that the seas and winds are fickle and being able to hold a course with damaged steering is going to be very difficult regardless of keel type or rigging (unless one wants do drift DDW, which should be a piece-of-cake )
__________________
Zanshin sailing
Zanshin is online now   Reply With Quote
Old 06-11-2013, 14:33   #367
Registered User
 
DeepFrz's Avatar

Cruisers Forum Supporter

Join Date: Mar 2006
Location: Winnipeg
Boat: None at this time
Posts: 8,462
Re: Rudder nightmare at sea

Quote:
Sand away my friend.... Sand away...........
But not until after removing all the mold release wax or you will imbed the wax into the sanding scratches.
DeepFrz is offline   Reply With Quote
Old 06-11-2013, 15:27   #368
Resin Head
 
minaret's Avatar

Cruisers Forum Supporter

Join Date: Aug 2007
Location: Seattle WA
Boat: Nauticat
Posts: 7,205
Images: 52
Re: Rudder nightmare at sea

Quote:
Originally Posted by Zanshin View Post
Minaret - doesn't acetone work to get rid of the release chemicals? I am pretty sure I've seen tins of Interlux 202 at the various chandleries in the islands so that should be available.

Meh. I usually two rag with lots of 202 several times (at least 3). With acetone I wouldn't be happy until I'd done it half a dozen times, at least. Acetone evaporates too quickly and is not aggressive enough. Failing 202 use xylene followed by a final tone wipe, all two rag. Sand 80, then 6 coats of Interlux 2000e, then two coats bottom paint. Bring the 2000 up onto the shaft 1/4"; prep first.
__________________
O you who turn the wheel and look to windward,

Consider Phlebas, who was once handsome and tall as you.
minaret is offline   Reply With Quote
Old 06-11-2013, 15:28   #369
Resin Head
 
minaret's Avatar

Cruisers Forum Supporter

Join Date: Aug 2007
Location: Seattle WA
Boat: Nauticat
Posts: 7,205
Images: 52
Re: Rudder nightmare at sea

Quote:
Originally Posted by Zanshin View Post
a Ketch or Yawl might balance, since the jib or genoa is in front of the keel and the mizzen is behind the keel, giving some dynamic stability. But I haven't tried it so can't comment from experience. But the reality is that the seas and winds are fickle and being able to hold a course with damaged steering is going to be very difficult regardless of keel type or rigging (unless one wants do drift DDW, which should be a piece-of-cake )


How about a ketch with all power roller furling?
__________________
O you who turn the wheel and look to windward,

Consider Phlebas, who was once handsome and tall as you.
minaret is offline   Reply With Quote
Old 07-11-2013, 08:05   #370
Moderator
 
JPA Cate's Avatar

Join Date: Nov 2011
Location: aboard, in Tasmania, Australia
Boat: Sayer 46' Solent rig sloop
Posts: 28,527
Re: Rudder nightmare at sea

Quote:
Originally Posted by Zanshin View Post
Yes, I tried that when I had no rudder. No chance of keeping a heading while at sea. Remember, things are very different when you have a rudder that is locked (preferably midships) and no rudder at all on a fin keel. Any change in balance between forces ahead of the keel and behind the keel result in immediate course changes.
Perhaps that is why Nigel 1 suggested the weight on the towline very close to the bow for the tow. With his experience, I'd think his idea would be better than my experiment.

Ann
__________________
Who scorns the calm has forgotten the storm.
JPA Cate is offline   Reply With Quote
Old 11-11-2013, 04:46   #371
Registered User
 
Bluewaters2812's Avatar

Join Date: Sep 2012
Location: UK
Boat: Van De Stadt Excalibur 36
Posts: 915
Images: 1
Send a message via Skype™ to Bluewaters2812
Re: Rudder nightmare at sea

Have sent an email to the French rep in France to ask when we can expect delivery. Tomorrow would be the two weeks we were originally promised. Still waiting for an answer.
Bluewaters2812 is offline   Reply With Quote
Old 11-11-2013, 04:56   #372
Senior Cruiser
 
atoll's Avatar

Cruisers Forum Supporter

Join Date: Mar 2010
Location: gettin naughty on the beach in cornwall
Boat: 63 custom alloy sloop,macwester26,prout snowgoose 37 elite catamaran!
Posts: 10,594
Images: 75
Re: Rudder nightmare at sea

it is called "waiting for parts in exotic places"................a tour of the rum distilleries in martanique will help pass the time!

still waiting for the delivery of the rudder since it was finished at the end of september on my next delivery!
atoll is offline   Reply With Quote
Old 11-11-2013, 05:57   #373
Registered User
 
Talbot's Avatar

Join Date: Jun 2004
Location: Brighton, UK
Boat: Privilege 37
Posts: 3,735
Images: 32
Re: Rudder nightmare at sea

Quote:
Originally Posted by sailorboy1 View Post
But face it, if you lose your rudder (not just your steering) unless you have a real emergency rudder that has attachments already installed, and have already tried it to be sure it really works, chances of any hair brained jury rigged system working are probably less than the number of boats that lose their rudders.
Happened in a boat I was crew in about 20 years ago. One minute in the lead of the race and in the middle of the English Channel, and spinnaker pulling like a train, the next we went through 3 fast broachs before the recognition that the whole rudder had disappeared.

half the crew concentrated on recovering all the sails, and the others on setting up an emergency rudder using a spinnaker pole, a very large spanner (to turn the pole), and a locker lid (secured to the sinnaker pole using a large number of plastic tie straps and numerous new drilled holes in the lid. Once that was in place, slow ahead and return to our berth (50 miles). Hard work, but it was successful.
__________________
"Be wary of strong drink. It can make you shoot at tax collectors - and miss."
Robert A Heinlein
Talbot is offline   Reply With Quote
Old 11-11-2013, 06:22   #374
Registered User
 
Bluewaters2812's Avatar

Join Date: Sep 2012
Location: UK
Boat: Van De Stadt Excalibur 36
Posts: 915
Images: 1
Send a message via Skype™ to Bluewaters2812
Re: Rudder nightmare at sea

Quote:
Originally Posted by atoll View Post
it is called "waiting for parts in exotic places"................a tour of the rum distilleries in martanique will help pass the time!

still waiting for the delivery of the rudder since it was finished at the end of september on my next delivery!
Haha, exotic is not what I would describe where we are lol. Now the rum distilleries ... perhaps a visit there would turn where we are into exotic We should have enough money left for one tot of rum, so the rest would be up to the imagination.
Bluewaters2812 is offline   Reply With Quote
Old 11-11-2013, 06:50   #375
Registered User

Join Date: Nov 2013
Location: San Juan, PR
Posts: 95
Re: Rudder nightmare at sea

Quote:
Originally Posted by Bluewaters2812 View Post
Haha, exotic is not what I would describe where we are lol. Now the rum distilleries ... perhaps a visit there would turn where we are into exotic We should have enough money left for one tot of rum, so the rest would be up to the imagination.
Hey Blue ..

What doesn't kill you only makes you stronger , hang in there buddy .
CaribbeanCraig is offline   Reply With Quote
Reply

Tags
rudder


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Advertise Here


All times are GMT -7. The time now is 10:47.


Google+
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.

ShowCase vBulletin Plugins by Drive Thru Online, Inc.