Cruisers Forum

Join CruisersForum Today

Thread Tools Rate Thread Display Modes
Old 02-03-2010, 15:20   #31
Registered User

Join Date: Feb 2010
Location: Simcoe, Ontario, Canada
Boat: Islander Mark II 30, 30ft - Zephyr
Posts: 78
Thanks guys. I kinda figured that it would not hurt to epoxy all of the holes. I removed the headliner and realized that some of the old holes that were in the deck were filled kinda poorly, and in some cases only silicone was used to fill them. I am going to go over the deck with a fine tooth comb from inside and out. Drill out any old holes and refill with epoxy as well. I am going to re paint the deck, so I might as well finish everything properly now so hopefully I don't have to do it again.

Captin_Kirk is offline   Reply With Quote

bed, removal

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Interior Woodwork Beersmith Construction, Maintenance & Refit 24 23-02-2013 12:04
I Suck at Woodwork unbusted67 Construction, Maintenance & Refit 31 29-08-2009 22:25
Converting the Cockpit into a Bed Hankthelank Monohull Sailboats 6 24-07-2009 21:21
Some Days - Stay in Bed! Ex-Calif The Sailor's Confessional 13 15-06-2009 01:53
Truck Bed Liner Paint Jmolan Construction, Maintenance & Refit 15 02-05-2009 18:40

Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -7. The time now is 14:31.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2018, vBulletin Solutions, Inc.

ShowCase vBulletin Plugins by Drive Thru Online, Inc.