Remaking Teak and Holly flooring

[Jon4399]

I found a floor panel to be rotten. The piece in about 2' x 3'. I carefully removed the edging board, and was able to carefully remove the delaminated plywood,leaving a 1/4" top sheet of T&H. So then I bought a 1/2" panel of plywood (thought about the green stuff, but it looked too rough, so I got a sanded panel.) I can cut the ply to the exact shape of the top flooring. My question is how to secure the plywood to the flooring. I have considered fiberglass resin, or structural glue such as Gorrilla Glue. I can refinish the flooring once the panel is glued back together. The resin would certainly waterproof the panel. Verathane would work, but maybe not as well.

[Uncle Bob]

Simple, Epoxy wood glue clamping whilst work cure's then finish with urethane on ALL surfaces.