On-Line SHOP MANUALS - Page 9

formosa41 · 22-07-2009, 10:44

looking for pictures or ant one that has experience with cutless removal on formosa 41 bronse housing

yardpro · 05-08-2009, 04:45

anyone have access to an exploded diagram of the yanmar 2qm15 with part numbers..

I have gone through this whole thread, and already have the service and shop manual, but am looking for something with part numbers

Albro359 · 08-08-2009, 18:35

Does anyone have or know where to look for operation and workshop manuals for

YANMAR 3QM3OF

VOLVO HYDRAULIC DRIVE vintage 1975

Thanks

Alan

bella · 17-08-2009, 15:16

So last saturday, three days after painting the quarterberth locker. the paint was dry. I installed new batteries and charger. The had a shock..
The Morrow S-60E depthfinder and the SiTex LoranC EX-7 came online.
Holy bat cave!!

So now I have spent the past two days attempting to locate a manual for either.. anyone have one or know of one? I called SiTex who referred me to Jaytron..I know Steve well..but before I call and spend the $$$ an online version would be thrilling. Thanks to all..

bugsmoran21 · 19-08-2009, 17:05

I'm looking for a shop manual for a Westerbeke 4-107. Can anyone help?

Thanks,
Bugs

GordMay · 20-08-2009, 04:34

Greetings and welcome aboard the CF, Bugs.

Westerbeke On-Line Manuals (Engines & Generators)
➥ westerbeke, marine generators, engines, Official Site

Westerbeke 4-107:

Technical Manual ➥ http://www.westerbeke.com/OnlineManu...ech_Manual.pdf

Parts Manual ➥ http://www.westerbeke.com/OnlineManuals/13765_Rev_7.pdf

Brochure ➥ http://www.westerbeke.com/productBrochures/w107.pdf

bugsmoran21 · 20-08-2009, 05:03

Gord, Thanks for the welcome and the info. Much appreciated.

Bugs

defever · 13-10-2009, 11:30

how about a shop manual for a perkins 6-3544??

GordMay · 13-10-2009, 12:18

The Perkins 6.354 line hasn’t been produced in nearly 30 years (± 1960 - 1980?), so manuals may be getting harder to find.
Turbo’ or NaturaL?

Perkins Manuals are available for sale at:
➥ Perkins Engine Manuals - Perkins Marine Workshop Manual - Perkins Parts Manual
➥ Perkins A6.354.4, T6.3544, 6.3544, 6.3724, engine service

luso · 02-11-2009, 22:29

great thread! Does any one have a manual for a seafurl 4880 and a older type with a oval three piece extrusion and with the sail luffs in ether end?I believe it was called gemeni also from hood. Thank you, Luso

GordMay · 03-11-2009, 04:51

Try contacting Hood Yacht Systems / Pompanette

HOOD Yacht Systems ➥ Home
7712 Cheri Court
Tampa, FL 323634, USA
TEL: 813 885 2182
FAX: 813 888 5793

POMPANETTE, LLC ➥ Pompanette LLC.
Corporate Headquarters
South West Street
P.O. Box W.
Charlestown, New Hampshire USA, 03603
TEL: 603 826 5791
FAX: 603 826 4125

luso · 03-11-2009, 07:32

Thank you, Gordmay, I did contact them but thery don't have manuels nor parts for my Giminni. They did however fax me a faded copy for the 4880 but it doesn't have some of the precise details I need and like, it is so hard to read. I thought maybe someone would have a digital copy?!

GordMay · 10-11-2009, 04:04

ADLER BARBOUR
Installation & Operating Manual
for “Cold Machine” or "Super Cold Machine” refrigeration:

Go ➥ http://www.raycotechnologies.org/adlerbarbour.pdf

➥ Refrigeration Solutions - Dometic

08-08-2009, 18:35	#123
Albro359 Registered User Join Date: Jun 2009 Location: Australia Boat: Spencer (NZ) 40 .. DIVA Posts: 57	Yanmar 3QM30F Volvo hydraulic drive Does anyone have or know where to look for operation and workshop manuals for YANMAR 3QM3OF VOLVO HYDRAULIC DRIVE vintage 1975 Thanks Alan

17-08-2009, 15:16	#124
bella Registered User Join Date: Mar 2003 Location: right here by the bridge Boat: LeComte Medalist 33 Posts: 66	Morrow S-60E and SiTex LoranC ez-7 So last saturday, three days after painting the quarterberth locker. the paint was dry. I installed new batteries and charger. The had a shock.. The Morrow S-60E depthfinder and the SiTex LoranC EX-7 came online. Holy bat cave!! So now I have spent the past two days attempting to locate a manual for either.. anyone have one or know of one? I called SiTex who referred me to Jaytron..I know Steve well..but before I call and spend the $$$ an online version would be thrilling. Thanks to all..

20-08-2009, 04:34	#126
GordMay Registered User Join Date: Mar 2003 Location: Thunder Bay, Ontario - 48-29N x 89-20W Boat: C.L.O.D. (Cruiser Living On Dirt) Posts: 12,575	Greetings and welcome aboard the CF, Bugs. Westerbeke On-Line Manuals (Engines & Generators) ➥ westerbeke, marine generators, engines, Official Site Westerbeke 4-107: Technical Manual ➥ http://www.westerbeke.com/OnlineManu...ech_Manual.pdf Parts Manual ➥ http://www.westerbeke.com/OnlineManuals/13765_Rev_7.pdf Brochure ➥ http://www.westerbeke.com/productBrochures/w107.pdf __________________ Gord May ~~_/)_~~ (Gord & Maggie - "Southbound") "If you didn't have time/$ to do it right in the first place, when will you get the time/$ to fix it?"

13-10-2009, 12:18	#129
GordMay Registered User Join Date: Mar 2003 Location: Thunder Bay, Ontario - 48-29N x 89-20W Boat: C.L.O.D. (Cruiser Living On Dirt) Posts: 12,575	The Perkins 6.354 line hasn’t been produced in nearly 30 years (± 1960 - 1980?), so manuals may be getting harder to find. Turbo’ or NaturaL? Perkins Manuals are available for sale at: ➥ Perkins Engine Manuals - Perkins Marine Workshop Manual - Perkins Parts Manual ➥ Perkins A6.354.4, T6.3544, 6.3544, 6.3724, engine service __________________ Gord May ~~_/)_~~ (Gord & Maggie - "Southbound") "If you didn't have time/$ to do it right in the first place, when will you get the time/$ to fix it?"

02-11-2009, 22:29	#130
luso Registered User Join Date: Apr 2008 Posts: 9	hood furling manual great thread! Does any one have a manual for a seafurl 4880 and a older type with a oval three piece extrusion and with the sail luffs in ether end?I believe it was called gemeni also from hood. Thank you, Luso

22-07-2009, 10:44	#121
formosa41 Registered User Join Date: Mar 2009 Posts: 3	looking for pictures or ant one that has experience with cutless removal on formosa 41 bronse housing

05-08-2009, 04:45	#122
yardpro Registered User Join Date: Jul 2009 Posts: 17	anyone have access to an exploded diagram of the yanmar 2qm15 with part numbers.. I have gone through this whole thread, and already have the service and shop manual, but am looking for something with part numbers

19-08-2009, 17:05	#125
bugsmoran21 Registered User Join Date: Aug 2009 Location: New Hampshire Boat: 1965 Chris Craft 35'SailYacht, I Hope! Posts: 5	I'm looking for a shop manual for a Westerbeke 4-107. Can anyone help? Thanks, Bugs

20-08-2009, 05:03	#127
bugsmoran21 Registered User Join Date: Aug 2009 Location: New Hampshire Boat: 1965 Chris Craft 35'SailYacht, I Hope! Posts: 5	Gord, Thanks for the welcome and the info. Much appreciated. Bugs

13-10-2009, 11:30	#128
defever Registered User Join Date: Aug 2008 Location: wherever the boat is---from central amer to canada....so far... Boat: defever trawler 41-nomad Posts: 51	how about a shop manual for a perkins 6-3544??

03-11-2009, 04:51	#131
GordMay Registered User Join Date: Mar 2003 Location: Thunder Bay, Ontario - 48-29N x 89-20W Boat: C.L.O.D. (Cruiser Living On Dirt) Posts: 12,575	Try contacting Hood Yacht Systems / Pompanette HOOD Yacht Systems ➥ Home 7712 Cheri Court Tampa, FL 323634, USA TEL: 813 885 2182 FAX: 813 888 5793 POMPANETTE, LLC ➥ Pompanette LLC. Corporate Headquarters South West Street P.O. Box W. Charlestown, New Hampshire USA, 03603 TEL: 603 826 5791 FAX: 603 826 4125 __________________ Gord May ~~_/)_~~ (Gord & Maggie - "Southbound") "If you didn't have time/$ to do it right in the first place, when will you get the time/$ to fix it?"

03-11-2009, 07:32	#132
luso Registered User Join Date: Apr 2008 Posts: 9	Thank you, Gordmay, I did contact them but thery don't have manuels nor parts for my Giminni. They did however fax me a faded copy for the 4880 but it doesn't have some of the precise details I need and like, it is so hard to read. I thought maybe someone would have a digital copy?!

10-11-2009, 04:04	#133
GordMay Registered User Join Date: Mar 2003 Location: Thunder Bay, Ontario - 48-29N x 89-20W Boat: C.L.O.D. (Cruiser Living On Dirt) Posts: 12,575	ADLER BARBOUR ADLER BARBOUR Installation & Operating Manual for “Cold Machine” or "Super Cold Machine” refrigeration: *Go ➥* http://www.raycotechnologies.org/adlerbarbour.pdf ➥ Refrigeration Solutions - Dometic __________________ Gord May ~~_/)_~~ (Gord & Maggie - "Southbound") "If you didn't have time/$ to do it right in the first place, when will you get the time/$ to fix it?"

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Water in refrigerant line	phorvati	Plumbing Systems and Fixtures	14	07-06-2007 14:36
I need a good line...	skipgundlach	Construction, Maintenance & Refit	5	27-05-2007 23:37
FCC New On line processing System	Pblais	Electronics: Communications & Audio Visual	6	08-04-2007 10:25
Single line reefing	harryvee	Deck hardware: Rigging, Sails & Hoisting	13	07-07-2006 19:22
Free Manuals (Donate yours)	GordMay	The Library	1	12-11-2003 13:16