On-Line SHOP MANUALS - Page 7

KarenandMichael · 11-11-2008, 23:56

I am looking for an operator's manual for the Yanmar Diesel Engine 2GMF. I saw and downloaded the GM Series Manual that I found from a link on this website, but is for GM 2GM 20 and 3 GM30. But, I don't know how similar these later models are to the 2GMF, which we have on our boat.

Karen

GordMay · 12-11-2008, 03:30

Yanmar:

The Service Manual for the 2GM (F) & (L) [1GM10-2GMFL-3GMDL]
http://www.motoren.ath.cx/download.php?filename=yanmar/Yanmar%20Service%20Manual_1GM(10L)%202GM(F)(L)%203 GM(D)(F)(L).pdf

-or-
http://www.cascadeengine.com/cec2/content/Manuals/Yanmar/Marine/GM%20and%20HM%20%20Series/Service%20Manual/1GM(10L),%202GM(F)(L),%203GM(D)(F)(L),%203HM(F)(L) %20-A0A1025.pdf

The Operation Manual for the GM Series
http://www.cascadeengine.com/cec2/co...961-202281.pdf

sneuman · 12-11-2008, 04:39

Has anyone located a shop manual for the Isuzu J-series (specifically the C240)?

Norsksailor · 12-11-2008, 06:03

Hey sailors!

Would anyone have an online shop/technical manual for the Westerbeke 20B Two (18hp)?

I have the Operator/Owner's manual & related parts lists, but no shop manual.

Thanks.

GordMay · 12-11-2008, 06:19

WESTERBEKE

Westerbeke 20B TWO Operator’s Manual & Installation Guide:
http://www.westerbeke.com/Online_Man...e_operator.pdf

All Online Manuals from Westerbeke:
Westerbeke Corporation

Torrenson will have the current (#43444) Technical Manual ($44).
http://www.westerbeke.com/technical/...al%2030041.pdf

Norsksailor · 12-11-2008, 06:49

Thanks Gord...but as mentioned in my post, I am looking for an online shop manual.

I already have the operator's manual and have dug through both Westerbeke's and Torrenson's site. Figured I'd check here before ordering the shop manual.

GordMay · 21-11-2008, 05:48

KATADYNE Manuals (PowerSurvivor Watermakers etc)

Download Area - Service - KATADYN International - the global Number One in individualized water purification systems and water purification products[backPid]%3D1127

GordMay · 14-12-2008, 06:12

From Albin:

Yanmar:
Albin Motor

Volvo Penta:
Albin Motor

GordMay · 11-01-2009, 12:04

All On-Line Manuals for WESTERBEKE:
http://www.westerbeke.com/parts/all_online_manuals.cfm

Westerbeke Generators Operators’ Manual
For their 3.8/4.5 kW Generators:
http://www.westerbeke.com/Online_Man...b_oper_man.pdf

Captain Bill · 19-02-2009, 08:53

SD40-50 Saildrive service manual found on-line

http://www.forsmarin.se/AlbinMotor/p...k%20SD50-2.pdf

Sahara · 20-02-2009, 15:03

US naval academy manual for on-board repairing Wilcox-Crittenden Skipper II head

http://www.usna.edu/sailing/training...headrepair.pdf

cdennyb · 24-02-2009, 17:18

Gord,

This stuff HAS TO be assembled on a single page here at the board. It's far too valuable to leave in a thread, I agree. There should be NO problem associated with copyrighting anything. You are mearly providing links to the mfg web sites in most regards to info they are providing free of charge anyway...and this board doesn't make anything in providing this info.
I think, in my own humble personal opinion, that you have way too much time on your hands!
LoL

GordMay · 12-04-2009, 06:56

BMC 1.5 & 1.8

These aren’t “Marine” manuals, but, nonetheless, may be of use.

Leyland BMC 1.5 Workshop Manual:
http://www.calcuttboats.com/pdfs/Wor...nual%201.5.pdf

BMC Operators’ Handbook (1.5 & 1.8):
http://www.calcuttboats.com/pdfs/Han...%20&%201.8.pdf

BMC 1.8 Workshop Manual
http://www.calcuttboats.com/pdfs/Wor...nual%201.8.pdf

Lady Diane · 12-04-2009, 16:28

Thanks, I did purchase a manual for my engine. You can now take me off this list!
Diane

GordMay · 20-04-2009, 11:01

The BurningZone web-site contains free downloadable manuals:

Goto:

http://www2.burningzone.nl/home.html

11-11-2008, 23:56	#91
KarenandMichael Registered User Join Date: Nov 2008 Posts: 1	Yanmar Diesel Engine 2GMF - Looking for Operator's Manual I am looking for an operator's manual for the Yanmar Diesel Engine 2GMF. I saw and downloaded the GM Series Manual that I found from a link on this website, but is for GM 2GM 20 and 3 GM30. But, I don't know how similar these later models are to the 2GMF, which we have on our boat. Karen

12-11-2008, 03:30	#92
GordMay Registered User Join Date: Mar 2003 Location: Thunder Bay, Ontario - 48-29N x 89-20W Boat: C.L.O.D. (Cruiser Living On Dirt) Posts: 12,575	*Yanmar:* The Service Manual* for the 2GM (F) & (L) [1GM10-2GMFL-3GMDL]* http://www.motoren.ath.cx/download.php?filename=yanmar/Yanmar%20Service%20Manual_1GM(10L)%202GM(F)(L)%203 GM(D)(F)(L).pdf -or- http://www.cascadeengine.com/cec2/content/Manuals/Yanmar/Marine/GM%20and%20HM%20%20Series/Service%20Manual/1GM(10L),%202GM(F)(L),%203GM(D)(F)(L),%203HM(F)(L) %20-A0A1025.pdf The Operation Manual* for the GM Series* http://www.cascadeengine.com/cec2/co...961-202281.pdf __________________ Gord May ~~_/)_~~ (Gord & Maggie - "Southbound") "If you didn't have time/$ to do it right in the first place, when will you get the time/$ to fix it?"

12-11-2008, 04:39	#93
sneuman Senior Cruiser Join Date: Aug 2005 Location: Severna Park, MD Boat: Tayana 37 Cutter - "Symbiosis" Posts: 1,117	Has anyone located a shop manual for the Isuzu J-series (specifically the C240)? __________________ Sailing Maryland Blog: http://sailingmaryland.blogspot.com/

12-11-2008, 06:03	#94
Norsksailor Registered User Join Date: Nov 2008 Location: Friendship, ME Boat: Sabre 30 Mark III - s/v Cloudman Posts: 8	Hey sailors! Would anyone have an online shop/technical manual for the Westerbeke 20B Two (18hp)? I have the Operator/Owner's manual & related parts lists, but no shop manual. Thanks. __________________ It's not whether you're paranoid...it's whether you're paranoid enough. s/v Cloudman Sabre 30 Mark III

12-11-2008, 06:19	#95
GordMay Registered User Join Date: Mar 2003 Location: Thunder Bay, Ontario - 48-29N x 89-20W Boat: C.L.O.D. (Cruiser Living On Dirt) Posts: 12,575	WESTERBEKE Westerbeke 20B TWO Operator’s Manual & Installation Guide: http://www.westerbeke.com/Online_Man...e_operator.pdf All Online Manuals from Westerbeke: Westerbeke Corporation Torrenson will have the current (#43444) Technical Manual ($44). http://www.westerbeke.com/technical/...al%2030041.pdf __________________ Gord May ~~_/)_~~ (Gord & Maggie - "Southbound") "If you didn't have time/$ to do it right in the first place, when will you get the time/$ to fix it?" Last edited by GordMay; 12-11-2008 at 06:25.

12-11-2008, 06:49	#96
Norsksailor Registered User Join Date: Nov 2008 Location: Friendship, ME Boat: Sabre 30 Mark III - s/v Cloudman Posts: 8	Thanks Gord...but as mentioned in my post, I am looking for an online shop manual. I already have the operator's manual and have dug through both Westerbeke's and Torrenson's site. Figured I'd check here before ordering the shop manual. __________________ It's not whether you're paranoid...it's whether you're paranoid enough. s/v Cloudman Sabre 30 Mark III

21-11-2008, 05:48	#97
GordMay Registered User Join Date: Mar 2003 Location: Thunder Bay, Ontario - 48-29N x 89-20W Boat: C.L.O.D. (Cruiser Living On Dirt) Posts: 12,575	KATADYNE Manuals (PowerSurvivor Watermakers etc) Download Area - Service - KATADYN International - the global Number One in individualized water purification systems and water purification products[backPid]%3D1127 __________________ Gord May ~~_/)_~~ (Gord & Maggie - "Southbound") "If you didn't have time/$ to do it right in the first place, when will you get the time/$ to fix it?"

14-12-2008, 06:12	#98
GordMay Registered User Join Date: Mar 2003 Location: Thunder Bay, Ontario - 48-29N x 89-20W Boat: C.L.O.D. (Cruiser Living On Dirt) Posts: 12,575	Miscellaneous ENGINE Manuals From Albin: Yanmar: Albin Motor Volvo Penta: Albin Motor __________________ Gord May ~~_/)_~~ (Gord & Maggie - "Southbound") "If you didn't have time/$ to do it right in the first place, when will you get the time/$ to fix it?"

11-01-2009, 12:04	#99
GordMay Registered User Join Date: Mar 2003 Location: Thunder Bay, Ontario - 48-29N x 89-20W Boat: C.L.O.D. (Cruiser Living On Dirt) Posts: 12,575	*All On-Line Manuals for WESTERBEKE:* http://www.westerbeke.com/parts/all_online_manuals.cfm Westerbeke Generators Operators’ Manual For their 3.8/4.5 kW Generators: http://www.westerbeke.com/Online_Man...b_oper_man.pdf __________________ Gord May ~~_/)_~~ (Gord & Maggie - "Southbound") "If you didn't have time/$ to do it right in the first place, when will you get the time/$ to fix it?"

19-02-2009, 08:53	#100
Captain Bill Registered User Join Date: Apr 2008 Location: North Carolina Boat: Endeavourcat Sailcat 44, Spiraserpula Posts: 269	SD40-50 Saildrive service manual found on-line http://www.forsmarin.se/AlbinMotor/p...k%20SD50-2.pdf

20-02-2009, 15:03	#101
Sahara Registered User Join Date: Jan 2009 Location: SW USA Posts: 55	US naval academy manual for on-board repairing Wilcox-Crittenden Skipper II head http://www.usna.edu/sailing/training...headrepair.pdf

24-02-2009, 17:18	#102
cdennyb Registered User Join Date: Jun 2007 Location: Northern California Boat: Beneteau 510, 51' or so Posts: 166	Gord, This stuff HAS TO be assembled on a single page here at the board. It's far too valuable to leave in a thread, I agree. There should be NO problem associated with copyrighting anything. You are mearly providing links to the mfg web sites in most regards to info they are providing free of charge anyway...and this board doesn't make anything in providing this info. I think, in my own humble personal opinion, that you have way too much time on your hands! LoL __________________ 2003 Beneteau 510, needs a tiny bit of work, but I have lots more time than money...

12-04-2009, 06:56	#103
GordMay Registered User Join Date: Mar 2003 Location: Thunder Bay, Ontario - 48-29N x 89-20W Boat: C.L.O.D. (Cruiser Living On Dirt) Posts: 12,575	BMC 1.5 & 1.8 These aren’t “Marine” manuals, but, nonetheless, may be of use. Leyland BMC 1.5 Workshop Manual: http://www.calcuttboats.com/pdfs/Wor...nual%201.5.pdf BMC Operators’ Handbook (1.5 & 1.8): http://www.calcuttboats.com/pdfs/Han...%20&%201.8.pdf BMC 1.8 Workshop Manual http://www.calcuttboats.com/pdfs/Wor...nual%201.8.pdf __________________ Gord May ~~_/)_~~ (Gord & Maggie - "Southbound") "If you didn't have time/$ to do it right in the first place, when will you get the time/$ to fix it?"

12-04-2009, 16:28	#104
Lady Diane Registered User Join Date: Mar 2008 Location: The boat and I are presently in Curacao, Netherlands Antilles; I spend summers in MN. Boat: Brewer 46 Pilot House Cutter, s/v Lady Diane Posts: 20	workshop manuals Thanks, I did purchase a manual for my engine. You can now take me off this list! Diane

20-04-2009, 11:01	#105
GordMay Registered User Join Date: Mar 2003 Location: Thunder Bay, Ontario - 48-29N x 89-20W Boat: C.L.O.D. (Cruiser Living On Dirt) Posts: 12,575	Manuals at burningzone.nl/home.html The BurningZone web-site contains free downloadable manuals: Goto: http://www2.burningzone.nl/home.html __________________ Gord May ~~_/)_~~ (Gord & Maggie - "Southbound") "If you didn't have time/$ to do it right in the first place, when will you get the time/$ to fix it?"

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Water in refrigerant line	phorvati	Plumbing Systems and Fixtures	14	07-06-2007 14:36
I need a good line...	skipgundlach	Construction, Maintenance & Refit	5	27-05-2007 23:37
FCC New On line processing System	Pblais	Electronics: Communications & Audio Visual	6	08-04-2007 10:25
Single line reefing	harryvee	Deck hardware: Rigging, Sails & Hoisting	13	07-07-2006 19:22
Free Manuals (Donate yours)	GordMay	The Library	1	12-11-2003 13:16