Cruisers Forum

Join CruisersForum Today

Thread Tools Rate Thread Display Modes
Old 25-11-2012, 12:29   #1
Registered User

Join Date: Oct 2009
Posts: 547
Installing Universal SSI Mast Boot

Anybody out there have luck installing the plastic SSI mast boot with the mast in the boat? I don't understand how you get a bead of silicon under the plastic since you must first glue the boot together tight around the mast. Seems like the silicon would have to be installed around the top of the boot rather than between the boot and the mast which I would think would be better. I'm also limited in how high I can install the boot since about 5 inches above the collar there is a exit from the mast for a halyard.
lancelot9898 is offline   Reply With Quote


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Our Communities

Our communities encompass many different hobbies and interests, but each one is built on friendly, intelligent membership.

» More about our Communities

Automotive Communities

Our Automotive communities encompass many different makes and models. From U.S. domestics to European Saloons.

» More about our Automotive Communities

Marine Communities

Our Marine websites focus on Cruising and Sailing Vessels, including forums and the largest cruising Wiki project on the web today.

» More about our Marine Communities

Copyright 2002-2015 Social Knowledge, LLC All Rights Reserved.

All times are GMT -7. The time now is 15:28.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2016, vBulletin Solutions, Inc.

ShowCase vBulletin Plugins by Drive Thru Online, Inc.