Cruisers Forum
 


Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on Cruisers Forums. Advertise Here
 
Thread Tools Search this Thread Rate Thread Display Modes
Old 26-11-2010, 15:45   #1
Registered User

Join Date: Jul 2010
Location: Rockhampton, Australia
Boat: No boat, looking again.
Posts: 360
How to Repair My Anchor ?

Any ideas on how to repair this anchor? While it ain't broke, in my opinion, it could do with some maintenence, but how to go about it. Perhaps a spray all over with silver paint and sell on Ebay as "like new!"? [kidding]





troppo is offline   Reply With Quote
Old 26-11-2010, 15:49   #2
Registered User
 
Dave the Canuck's Avatar

Join Date: Jul 2008
Location: Georgian Bay, Canada
Boat: Catalina 34 - "Points North"
Posts: 493
Ho to repair my anchor.

Dang. I thought this was a thread about working girls who did metal work on the side.

Sigh...
__________________
Dave
Dave the Canuck is offline   Reply With Quote
Old 26-11-2010, 15:54   #3
Moderator Emeritus
 
capngeo's Avatar

Cruisers Forum Supporter

Join Date: Jul 2010
Location: Key West & Sarasota
Boat: Cal 28 "Happy Days"
Posts: 4,210
Images: 12
Send a message via Yahoo to capngeo Send a message via Skype™ to capngeo
Well..... If you really wanted to, beat the loose rust off with a needle scaler, sand blaster, etc. Dip in acid to get the rest, and remove the zinc galvanizing. Weld filler where required, then send out for another hot-dip galvanize...... Or bag it as a spare, and buy a new one for boat to wear!
__________________
Any fool with a big enough checkbook can BUY a boat; it takes a SPECIAL type of fool to build his own! -Capngeo
capngeo is offline   Reply With Quote
Old 26-11-2010, 15:56   #4
Registered User

Join Date: Jun 2010
Location: Bay Area
Posts: 235
Dave Canuck good one.
dofthesea is offline   Reply With Quote
Old 26-11-2010, 15:56   #5
Registered User
 
marc2012's Avatar

Join Date: Apr 2008
Location: abbeville la
Boat: seawind II Patience
Posts: 541
J am with Dave,big disappointment.can wire brush and use galvanize paint,have regalvanized, or paint with rustoleum.marc
marc2012 is offline   Reply With Quote
Old 26-11-2010, 16:17   #6
Moderator Emeritus
 
Pblais's Avatar

Join Date: Mar 2003
Location: Hayes, VA
Boat: Gozzard 36
Posts: 8,700
Images: 15
Send a message via Skype™ to Pblais
George has it right.

Anchors need only one quality - "trust". I wouldn't use it on my boat. It's why I would never buy an anchor on eBay too. I have an old CQR with no rust, but it's a spare. I think you value your boat a lot. You could do better than this anchor on eBay.
__________________
Paul Blais
s/v Bright Eyes Gozzard 36
37 15.7 N 76 28.9 W
Pblais is offline   Reply With Quote
Old 26-11-2010, 16:27   #7
Registered User
 
markpierce's Avatar

Join Date: Aug 2010
Location: Central California
Boat: M/V Carquinez Coot
Posts: 3,782
Looks like a cosmetic problem. If that's your problem, have it sandblasted and properly primed and painted.
markpierce is offline   Reply With Quote
Old 26-11-2010, 16:38   #8
Moderator Emeritus
 
Hudson Force's Avatar

Cruisers Forum Supporter

Join Date: Nov 2008
Location: Lived aboard & cruised for 45 years,- now on a chair in my walk-in closet.
Boat: Morgan OI 413 1973 - Aythya
Posts: 8,455
Images: 1
I agree that this appears to be largely a cosmetic problem. I have a couple of ugly anchors on my bow, but they are very reliable. I see some pretty stainless anchors on some dock queens that have never been dipped in the mud. I find my anchors at consignment shops for $60 to $100 bucks for a 45lb Bruce or CQR. I bought these when former anchors were fouled and I cut them away.
__________________
Take care and joy, Aythya crew
Hudson Force is offline   Reply With Quote
Old 26-11-2010, 17:33   #9
Registered User
 
senormechanico's Avatar

Join Date: Aug 2003
Boat: Dragonfly 1000 trimaran
Posts: 7,147
Whenever I walk a marina dock, I look to see if I find anchors still have the stick on labels intact. I'm never disappointed.
__________________
The question is not, "Who will let me?"
The question is,"Who is going to stop me?"


Ayn Rand
senormechanico is offline   Reply With Quote
Old 26-11-2010, 19:28   #10
Registered User
 
cfarrar's Avatar

Join Date: Apr 2008
Location: Brooklin, Maine U.S.A
Boat: Allures 44
Posts: 734
Images: 2
Wait a minute. I used to have a CQR (sold it on EBay), but my memory is hazy.... Didn't there used to be a weight in the corroded area in the photo? If so, then this CQR will not perform likes others.

I'd find yourself a more reliable hook.
cfarrar is offline   Reply With Quote
Old 26-11-2010, 19:33   #11
Registered User
 
sabray's Avatar

Join Date: Aug 2008
Location: Wash DC
Boat: PETERSON 44
Posts: 3,165
I thinks its a cqr knock off. Probably fine for its purpose though. Im all for bashing off the rusty stuff and maybe even take an arc welder to it a bit. So long as the critical points are still solid.
sabray is offline   Reply With Quote
Old 26-11-2010, 19:42   #12
Registered User
 
senormechanico's Avatar

Join Date: Aug 2003
Boat: Dragonfly 1000 trimaran
Posts: 7,147
It's definitely a knockoff.
A real CQR has a drop forged shank.
This one has been cut from a steel plate.
__________________
The question is not, "Who will let me?"
The question is,"Who is going to stop me?"


Ayn Rand
senormechanico is offline   Reply With Quote
Old 26-11-2010, 19:44   #13
Registered User
 
NotQuiteLost's Avatar

Join Date: Sep 2010
Location: Paradise (better known to most people as: Philippines)
Boat: 65' Custom Steel Ketch
Posts: 322
Images: 4
Quote:
Originally Posted by cfarrar View Post
Wait a minute. I used to have a CQR (sold it on EBay), but my memory is hazy.... Didn't there used to be a weight in the corroded area in the photo? If so, then this CQR will not perform likes others.

I'd find yourself a more reliable hook.
I was thinking exactly the same thing. If it's a knock-off, it's little better than a light-ish plow anchor, and if it's an original which has inexplicably lost its lead (I think that's what CQR uses? not sure, though...shameful, since I've got a genuine 100lb on the boat) then I'm not sure if it's worth the fuss of repair.

It's better than nothing, absolutely, and can be cleaned with a wire wheel on an angle grinder, or better with a sandblast job.
NotQuiteLost is offline   Reply With Quote
Old 26-11-2010, 20:17   #14
Registered User

Join Date: Jan 2010
Location: Narragansett Bay
Boat: Able 50
Posts: 3,139
Here's a real one :
Attached Thumbnails
Click image for larger version

Name:	CQR.jpg
Views:	126
Size:	136.7 KB
ID:	21500  
savoir is offline   Reply With Quote
Old 27-11-2010, 00:06   #15
Registered User

Join Date: Jul 2010
Location: Rockhampton, Australia
Boat: No boat, looking again.
Posts: 360
Fantastic replies, thank you folks.

This was the main anchor on the boat I just bought but I have retired it. I think I will see if I can get it sandblasted by someone in my network so it doesn't cost too much and use it as a light spare, maybe a lunchtime anchor or if I put two lines out. In my opinion, which is to say, out of my ignorance, I think it is too light for my boat to rely upon overnight in the high tidal range areas I will be sailing in, especially if a bit of a blow comes up.

If I can't get it economically restored, I will sell in on Ebay as Captain Cook's original anchor or something. Nah, I will put it on the coffee table as a conversation piece.

The conversation will go something like this:

Her: "Get that pile of rust off my table!"
Me: "But . . . ."
Her: "I said GIT . . .!"

Here's my boat, once I put the anchor and rode in, not much room for anything else, but hey, at least it will stop me from being blown over to some other country. Then again, if I put the anchor on the coffee table instead of in my boat, I will be happy to be blown over to some other country.



troppo is offline   Reply With Quote
Reply

Tags
anchor

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Repair or Replace the Motor in My McMurray Anchor Windlass dwillows Anchoring & Mooring 5 04-09-2011 13:07
Repair Links for Anchor Chain landonshaw Anchoring & Mooring 2 03-11-2010 09:52
Fender Repair Lawrence Construction, Maintenance & Refit 10 28-10-2009 18:39
Para-Anchor Intl. Force 10 parachute sea anchor colemj Classifieds Archive 18 03-09-2008 12:58
need VHF gelcoat repair and diesel repair converted to DVD schoonerdog General Sailing Forum 6 05-04-2007 19:23

Advertise Here


All times are GMT -7. The time now is 18:46.


Google+
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.

ShowCase vBulletin Plugins by Drive Thru Online, Inc.