They have the molds and parts
The die for the toe rail extrusions got broke. SAPA in Portland
who did the extrusions wants $5k to make a new die. I found the toe rails from a 29' that had been scraped and I found someone in Atlanta GA who changed out the toe rails on his 29'. So he is going to ship the old ones to me(at my $).
My cascade has teak
raised toe rails that a PO put on. Short story is they leaked rotted part of deck
and about 2' of shear clamp.
Are you using pan head
or flat head
screws into the deck
? From what I have seen most use pan head screws. Where the screw holes are I think they leak. Last year I helped a friend redo his toe rails ( after part of deck and shear clamp replacement) and we counter sunk flat head screws.
So this is my Spring project
when the rain stops. So I can go sailing for the Summer.