Cruisers Forum

Join CruisersForum Today

Thread Tools Rate Thread Display Modes
Old 11-01-2006, 07:38   #1
Senior Cruiser

Cruisers Forum Supporter

Join Date: Feb 2003
Location: Macatawa Michigan
Boat: Amanda Faye 61' Custom Irwin aftcockpit ketch
Posts: 1,414
Images: 106

I understand that using Boesheild on electrical connections works well. Anyone try it?
irwinsailor is offline   Reply With Quote
Old 11-01-2006, 08:21   #2
Moderator Emeritus
GordMay's Avatar

Join Date: Mar 2003
Location: Thunder Bay, Ontario - 48-29N x 89-20W
Boat: (Cruiser Living On Dirt)
Posts: 32,209
Images: 240
"Boesheild T-9" is a decent moisture penetrant-displacement-lubricant, that dries to a non-conductive ‘waxy’ finish. Apply lightly to overcoat, as a Sealant-Coating, to completed electrical connections, let dry without wiping.

I prefer 3M “Scotchkotte”, or “Corrosion-X” Sealant-Coatings,
Ideal “No-Alox”, Burndy “Penetrox” etc Anti-Oxidants.

CRIMPED TERMINATIONS: Apply an Anti-Oxidant to wire, Crimp Joint, then Overcoat w/w Adhesive Lined Heat Shrink.

SCREW TERMINALS: Apply an Anti-Oxidant between Bus Bar & Wire Terminal, screw tight, then spray an overcoat of Sealant-Coating.

Gord May
"If you didn't have the time or money to do it right in the first place, when will you get the time/$ to fix it?"

GordMay is offline   Reply With Quote

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -7. The time now is 13:42.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2018, vBulletin Solutions, Inc.

ShowCase vBulletin Plugins by Drive Thru Online, Inc.