Cruisers Forum
 


Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on Cruisers Forums. Advertise Here
 
Thread Tools Search this Thread Rate Thread Display Modes
Old 25-12-2015, 14:52   #1
Registered User
 
Rusty123's Avatar

Join Date: Sep 2013
Location: Poulsbo, Washington
Boat: Spirit 28
Posts: 228
Bilge condensation

My bilge seems to accumulate a cup or two of condensation each week, particularly in the winter, when Puget Sound humidity is high and water (hull) temps are cold. I don't like leaving standing water in the bilge, but short of leaving the bilge access hatch open (which does work), is there another way to keep it dry? Maybe a small fan?
Rusty123 is offline   Reply With Quote
Old 25-12-2015, 15:22   #2
Registered User
 
Boatyarddog's Avatar

Join Date: Nov 2014
Location: Olympia, Washington
Boat: 1979 Mariner Ketch 32-Hull 202
Posts: 2,124
Images: 2
Re: Bilge condensation

Hummm...
It's is just the bilge.
Do you have a drip less shaft seal? If so check to see if it's fresh or sea water.
If it's a standard packing, it should leak a couple drops every 5, seconds or so.
And if the tube runs to the bilge then your going to have a little in there once a week.


Sent from SV Cloud Duster
Boatyarddog is offline   Reply With Quote
Old 25-12-2015, 17:33   #3
Registered User
 
Rusty123's Avatar

Join Date: Sep 2013
Location: Poulsbo, Washington
Boat: Spirit 28
Posts: 228
Re: Bilge condensation

It's drip less. Water is not salty (but I wouldn't say it's fresh, cause it's nasty). Anyway, I'm pretty sure it's condensation, because when I leave the bilge access hatch open, it stays dry.
Rusty123 is offline   Reply With Quote
Old 25-12-2015, 22:57   #4
Senior Cruiser

Cruisers Forum Supporter

Join Date: May 2013
Location: Oregon to Alaska
Boat: Wheeler Shipyard 83' ex USCG
Posts: 3,509
Re: Bilge condensation

I have a wood boat and have low volume forced ventilation. Not only do the bilges stay dry, but no boat smell. In big spaces I have computer 12 volt fans that circulate air and run when on shore power or any time an engine is running.
Lepke is offline   Reply With Quote
Old 25-12-2015, 23:11   #5
Registered User
 
Lizzy Belle's Avatar

Join Date: Nov 2015
Location: Netherlands
Boat: Ohlson 29
Posts: 1,519
Re: Bilge condensation

Fans help, and maybe a dehumidifier, if you don't have one running already.
Most important is ventilation tho - I've learned that nothing really helps unless there is plenty of ventilation.
__________________
"Il faut être toujours ivre." - Charles Baudelaire
Dutch ♀ Liveaboard, sharing an Ohlson 29 with a feline.
Lizzy Belle is offline   Reply With Quote
Old 26-12-2015, 10:08   #6
Registered User
 
rognvald's Avatar

Join Date: Jan 2011
Location: Now based on Florida's West coast
Boat: Pearson 34-II
Posts: 2,578
Images: 5
Re: Bilge condensation

Rusty,
There may be another culprit in addition to condensation: the relief valve on your hot water heater if you are plugged into shore power or running your engine regularly. We would accumulate water in our shallow bilges after a week of no rain. At first, we thought there was a leak in one of our water tanks. After further inspection, it was the hot water heater discharging water when the tank reached maximum temperature. If your heater is turned to the highest setting, dial it down and you should have a decrease in water discharge. While you're at it, it is always good practice to flush your relief valve a couple times a month in case there is any corrosion in the valve/lines. Ours has a hose that directs the water to the bilge. Hope this helps. Good luck and good sailing.
__________________
"And those who were seen dancing were thought to be insane by those who could not hear the music."
Friedrich Nietzsche, Thus Spake Zarathrustra
rognvald is offline   Reply With Quote
Old 26-12-2015, 14:40   #7
Registered User
 
Blue Crab's Avatar

Join Date: Sep 2009
Location: Hurricane Highway
Boat: O'Day 28
Posts: 3,920
pirate Re: Bilge condensation

it is always good practice to flush your relief valve a couple times a month


I have a composting relief valve ... it's not easy being green.
Blue Crab is offline   Reply With Quote
Old 26-12-2015, 15:02   #8
Registered User
 
Cheechako's Avatar

Join Date: Aug 2006
Location: Skagit City, WA
Posts: 25,515
Re: Bilge condensation

if you are heating your boat at all the condensation is simply running down the hull into the bilge. Not a worry and not much you can do.
__________________
"I spent most of my money on Booze, Broads and Boats. The rest I wasted" - Elmore Leonard











Cheechako is offline   Reply With Quote
Old 26-12-2015, 15:09   #9
Registered User
 
Tayana42's Avatar

Join Date: Nov 2012
Location: Long Beach, CA
Boat: Tayana Vancouver 42
Posts: 2,804
Re: Bilge condensation

I agree with Rognvald that it is worth looking at the water heater relief valve. Easy to check and solve.


S/V B'Shert
Tayana42 is offline   Reply With Quote
Old 26-12-2015, 17:02   #10
Registered User
 
Rusty123's Avatar

Join Date: Sep 2013
Location: Poulsbo, Washington
Boat: Spirit 28
Posts: 228
Re: Bilge condensation

Boat is basically in layup at the dock now, while I restore some of the interior systems. Not running the water heater now, but good point about the relief valve - I'll add that to my maintenance list.

I do leave a small peltier dehumidifier that I leave running, as well as a low wattage heater. Seems to keep the cabin fairly dry, but with the sole hatch in place, water seems to accumulate.

I vacuum it out with a shop vac every few weeks, but I would rather it stay dry, since my hull is blister prone.
Rusty123 is offline   Reply With Quote
Reply

Tags
bilge, condensation


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Best bilge pump to keep the bilge as dry as possible keelsidedown Plumbing Systems and Fixtures 24 30-05-2018 15:51
condensation, condensation, aghhhhh!!!!! sthurley Monohull Sailboats 11 02-01-2015 09:48
Hard Bilge vs Soft Bilge . . . otherthan Monohull Sailboats 17 04-11-2010 16:18
1990 Wellcraft San Remo Bilge Pump Locations and Foul Bilge Smell skyinb Powered Boats 2 25-06-2010 19:21
Bilge Pumps vs Bilge Pumps RoJack1 Construction, Maintenance & Refit 12 30-05-2010 19:01

Advertise Here


All times are GMT -7. The time now is 20:42.


Google+
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.

ShowCase vBulletin Plugins by Drive Thru Online, Inc.