Cruisers Forum
 


Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on Cruisers Forums. Advertise Here
 
Thread Tools Search this Thread Rate Thread Display Modes
Old 07-05-2011, 04:41   #76
Registered User
 
Blue Stocking's Avatar

Join Date: Dec 2008
Location: St. Georges, Bda
Boat: Rhodes Reliant 41ft
Posts: 4,131
Re: And So It Begins... Knottybuoyz' New Project

---- and no doubt you dipped the wound in Acetone before wrapping it
__________________
so many projects--so little time !!
Blue Stocking is offline   Reply With Quote
Old 07-05-2011, 05:00   #77
Building a Bateau TW28
 
knottybuoyz's Avatar

Cruisers Forum Supporter

Join Date: Nov 2005
Location: Iroquois, Ontario
Boat: Bateau TW28 Long Cabin
Posts: 3,585
Images: 87
Re: And So It Begins... Knottybuoyz' New Project

Quote:
Originally Posted by Blue Stocking View Post
---- and no doubt you dipped the wound in Acetone before wrapping it
Contrary to what the wife thinks I can fix most things with a lil' epoxy and fiberglass!
__________________
Yours Aye! Rick
~^~^~^^~^~^~^~^~^~^~^~~^~^~~^~^~^^~~^~^
"It's not the boat "you built" until you've sworn at it, bled on it, sweated over it, cried beside it and then threatened to haul the POS outside and burn it!"
knottybuoyz is offline   Reply With Quote
Old 07-05-2011, 08:54   #78
Moderator Emeritus
 
hummingway's Avatar

Cruisers Forum Supporter

Join Date: Jan 2010
Location: Gabriola Island & Victoria, British Columbia
Boat: Cooper 416 Honeysuckle
Posts: 6,933
Images: 5
Re: And So It Begins... Knottybuoyz' New Project

So those are epoxied together and then wrap around the ribs in one big piece?
__________________
“We are the universe contemplating itself” - Carl Sagan

hummingway is offline   Reply With Quote
Old 07-05-2011, 09:08   #79
Registered User
 
delmarrey's Avatar

Join Date: Mar 2003
Location: Philippines in the winters
Boat: It’s in French Polynesia now
Posts: 11,368
Images: 122
Re: And So It Begins... Knottybuoyz' New Project

Quote:
Originally Posted by knottybuoyz View Post
I got bit by a runaway measuring tape snake.



So technically I have now bled on my project. Good thing for paper towel and hockey tape in the bowshed. Hockey tape is almost as good as duct tape in emergencies!
You have to add a little DNA to the epoxy once in awhile. That way it'll become kin and it'll not beset you. And if it ever gets stolen you can prove it's yours.

BTW, have you been assigned a hull # yet? Hull Serial Number (HIN) - Transport Canada
__________________
Faithful are the Wounds of a Friend, but the Kisses of the Enemy are Deceitful! ........
The measure of a man is how he navigates to a proper shore in the midst of a storm!
delmarrey is offline   Reply With Quote
Old 07-05-2011, 14:36   #80
Building a Bateau TW28
 
knottybuoyz's Avatar

Cruisers Forum Supporter

Join Date: Nov 2005
Location: Iroquois, Ontario
Boat: Bateau TW28 Long Cabin
Posts: 3,585
Images: 87
Re: And So It Begins... Knottybuoyz' New Project

Quote:
Originally Posted by hummingway View Post
So those are epoxied together and then wrap around the ribs in one big piece?
The panels are laid on the strongback frame.





I'll setup the strongback after all the long panels are done. Once the panels are laid on they're stitched together with plastic wire ties to temporarily hold them in place. The seams are epoxy glued and taped and the wire ties removed. Once the hull is in this condition it can be fiberglassed and faired. When the outside is done it gets flipped and the same process is done on the inside. Essentially a monocoque construction method.
__________________
Yours Aye! Rick
~^~^~^^~^~^~^~^~^~^~^~~^~^~~^~^~^^~~^~^
"It's not the boat "you built" until you've sworn at it, bled on it, sweated over it, cried beside it and then threatened to haul the POS outside and burn it!"
knottybuoyz is offline   Reply With Quote
Old 07-05-2011, 14:37   #81
Building a Bateau TW28
 
knottybuoyz's Avatar

Cruisers Forum Supporter

Join Date: Nov 2005
Location: Iroquois, Ontario
Boat: Bateau TW28 Long Cabin
Posts: 3,585
Images: 87
Re: And So It Begins... Knottybuoyz' New Project

Quote:
Originally Posted by delmarrey View Post
You have to add a little DNA to the epoxy once in awhile. That way it'll become kin and it'll not beset you. And if it ever gets stolen you can prove it's yours.

BTW, have you been assigned a hull # yet? Hull Serial Number (HIN) - Transport Canada
A HIN isn't required for a home built boat. I will register it though and have a proper hull ID number. I used to work beside the Chief Registrar when Coast Guard was part of Transport Canada.
__________________
Yours Aye! Rick
~^~^~^^~^~^~^~^~^~^~^~~^~^~~^~^~^^~~^~^
"It's not the boat "you built" until you've sworn at it, bled on it, sweated over it, cried beside it and then threatened to haul the POS outside and burn it!"
knottybuoyz is offline   Reply With Quote
Old 07-05-2011, 22:00   #82
Registered User
 
James S's Avatar

Cruisers Forum Supporter

Join Date: May 2008
Location: We're technically refugees from our home in Yemen now living in Lebenon
Boat: 1978 CT48
Posts: 5,964
Images: 139
Re: And So It Begins... Knottybuoyz' New Project

Looking like a boat Rick....excellent!
__________________
James
S/V Arctic Lady
I love my boat, I can't afford not to!
James S is offline   Reply With Quote
Old 08-05-2011, 06:57   #83
Building a Bateau TW28
 
knottybuoyz's Avatar

Cruisers Forum Supporter

Join Date: Nov 2005
Location: Iroquois, Ontario
Boat: Bateau TW28 Long Cabin
Posts: 3,585
Images: 87
Re: And So It Begins... Knottybuoyz' New Project

Quote:
Originally Posted by James S View Post
Looking like a boat Rick....excellent!
Sorry James, those pics aren't of my boat. I'm not that far yet. I just posted them to illustrate how it's done. I should have said that.

I just glued & taped the first seams of the bottom panels. They're so big I have to do them in halves and join them later. Then I have to figure out where I'm going to store them until the strongback frame is setup and I can lay them on it. It's going to get tight!

If all goes well this week, weather permitting, I should be joining the halves together by next weekend.

PS. Short of amputation how do you get a deeply embedded sliver out of the pad of your thumb? Exacto knife? Needle?
__________________
Yours Aye! Rick
~^~^~^^~^~^~^~^~^~^~^~~^~^~~^~^~^^~~^~^
"It's not the boat "you built" until you've sworn at it, bled on it, sweated over it, cried beside it and then threatened to haul the POS outside and burn it!"
knottybuoyz is offline   Reply With Quote
Old 08-05-2011, 07:31   #84
Registered User
 
DeepFrz's Avatar

Cruisers Forum Supporter

Join Date: Mar 2006
Location: Winnipeg
Boat: None at this time
Posts: 8,462
Re: And So It Begins ... Knottybuoyz' New Project

Quote:
Short of amputation how do you get a deeply embedded sliver out of the pad of your thumb? Exacto knife? Needle?
Doctor?
DeepFrz is offline   Reply With Quote
Old 08-05-2011, 08:13   #85
Moderator Emeritus
 
hummingway's Avatar

Cruisers Forum Supporter

Join Date: Jan 2010
Location: Gabriola Island & Victoria, British Columbia
Boat: Cooper 416 Honeysuckle
Posts: 6,933
Images: 5
Re: And So It Begins ... Knottybuoyz' New Project

I've always used a needle and a good set of tweezers. Sterilize the needle with a flame first.
__________________
“We are the universe contemplating itself” - Carl Sagan

hummingway is offline   Reply With Quote
Old 08-05-2011, 09:19   #86
Registered User
 
delmarrey's Avatar

Join Date: Mar 2003
Location: Philippines in the winters
Boat: It’s in French Polynesia now
Posts: 11,368
Images: 122
Re: And So It Begins... Knottybuoyz' New Project

Quote:
Originally Posted by knottybuoyz View Post
PS. Short of amputation how do you get a deeply embedded sliver out of the pad of your thumb? Exacto knife? Needle?
Very sharp tweezers. You dig and dig until you get a hold of it. And with wood you'll still need to use an antibiotic ointment. Even the mini-micro fibers left behind will try to become infected.


.
Attached Thumbnails
Click image for larger version

Name:	twezzers.JPG
Views:	474
Size:	110.0 KB
ID:	27114  
__________________
Faithful are the Wounds of a Friend, but the Kisses of the Enemy are Deceitful! ........
The measure of a man is how he navigates to a proper shore in the midst of a storm!
delmarrey is offline   Reply With Quote
Old 08-05-2011, 11:28   #87
Registered User

Join Date: May 2009
Location: Vancouver, Wash.
Boat: no longer on my Cabo Rico 38 Sanderling
Posts: 1,810
Send a message via MSN to John A
Re: And So It Begins ... Knottybuoyz' New Project

The procedure I sometimes used to remove deep slivers that I received while living on a farm are not recommended by the medical profession, but it worked.

Let the wound become infected. The resulting liquid around the sliver plus the swelling will allow you to remove it. Be sure to disinfect the heck out of the wound when done.
John A is offline   Reply With Quote
Old 08-05-2011, 11:44   #88
td1
Registered User

Join Date: Sep 2009
Location: CO, USA
Posts: 33
Re: And So It Begins ... Knottybuoyz' New Project

I usually get impatient with splinters and cut them out with a razor blade sterilized in alcohol. Got to be okay with the sight of your own blood to do a good job, and probably not the recommended method. Make sure to sterilize and bandage well when you're done (duct tape over the bandaid will hold it on while you're working).
td1 is offline   Reply With Quote
Old 09-05-2011, 05:02   #89
Building a Bateau TW28
 
knottybuoyz's Avatar

Cruisers Forum Supporter

Join Date: Nov 2005
Location: Iroquois, Ontario
Boat: Bateau TW28 Long Cabin
Posts: 3,585
Images: 87
Re: And So It Begins ... Knottybuoyz' New Project

Quote:
Originally Posted by DeepFrz View Post
Doctor?
I'm sure my lil' sliver would overtax our already over burdened free health system Frz!

I tried the needle thingy, no go. Tried the tweezers, no go. Tried the rusty X-Acto knife, no go, couldn't get deep 'nuff. I guess I'll just have to wait till it festers and sets itself free!

I got the first half section of bottom panel glued up yesterday and will flip it tonight to tape & glue the backside. Slow but steady!
__________________
Yours Aye! Rick
~^~^~^^~^~^~^~^~^~^~^~~^~^~~^~^~^^~~^~^
"It's not the boat "you built" until you've sworn at it, bled on it, sweated over it, cried beside it and then threatened to haul the POS outside and burn it!"
knottybuoyz is offline   Reply With Quote
Old 09-05-2011, 05:47   #90
Registered User
 
DeepFrz's Avatar

Cruisers Forum Supporter

Join Date: Mar 2006
Location: Winnipeg
Boat: None at this time
Posts: 8,462
Re: And So It Begins ... Knottybuoyz' New Project

Keep an eye on it. Removing it now would be preferable to a "thumbectomy".

Sounds like you are making great progress on the boat.
DeepFrz is offline   Reply With Quote
Reply

Tags
boat building, bow shed, construction, fairing, Flexicat, home built, paracelle, stitch & glue, trawler

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Advertise Here


All times are GMT -7. The time now is 20:39.


Google+
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.

ShowCase vBulletin Plugins by Drive Thru Online, Inc.