Getting to the short strokes acrylic
replacement but have a question or two.
Picture # 1 shows the hatch
frame ready for acylic. I will be putting down a double thickness of butyl tape as the lip from the hatch
seal extends upward. I have put small pieces of tape on hatch to showthis.
In picture #2 I have placed the acrylic
in frame. Question - should I remove the butyl tape that will extend out from under the acylic? The reason I am consedering doing this is that I want the sealant
to make as much contact with the acrylic and hatch frame as possible.
Am I being to anal (again)?