I would like to add some
security sensors to my
Lewmar hatches, which necessitates the use of the 3M industrial Velcro.
I know
acrylic can be sensitive to chemicals, for instance: I had some crazing from using a bike inner tube as a
gasket - but none from gluing a fitting back on with epoxy!
I wondered if there might be something in the sticky self
adhesive (that is commonly used for Velcro, stickers etc) that could cause crazing in the
acrylic.
Has anyone used rubbery-gummy self-adhesive on Acrylic, stickers or the like, and can report any problems.
Input or
advice very much appreciated!.