Cruisers Forum

Join CruisersForum Today

Thread Tools Rate Thread Display Modes
Old 14-12-2008, 02:35   #1
Registered User
Hampus's Avatar

Join Date: May 2008
Location: Sweden
Boat: Between boats
Posts: 463
Images: 6
Send a message via MSN to Hampus
pirate Yanmar 3GM30F cooling

How would I go about and flush out the cooling system (fresh water side) of a Yanmar 3GM30F? My thought is to remove the thermostat, remove incoming and outgoing hoses and put them in a couple of buckets. One with fresh water and one empty to fill with the old stuff, then just run the engine until the water is clean, then fill up with new coolant. Any problems in doing this or is there a better, less messy way?

On the way back to Sweden.
Hampus is offline   Reply With Quote

3gm, 3gm30, cooling, yanmar

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Yanmar 3GM30F Engine Electrolysis Xtofinooic Engines and Propulsion Systems 8 12-06-2010 07:08
Yanmar 3GM30F to Buhk Saildrive leg Z7 Uncle Braddah Construction, Maintenance & Refit 0 01-10-2008 13:21
Yanmar 3GM30F Badsanta Engines and Propulsion Systems 37 07-04-2008 19:59
Yanmar 3GM30F - followup-IP/cutoff cable calphi27 Engines and Propulsion Systems 1 05-09-2007 11:10

Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -7. The time now is 20:29.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2018, vBulletin Solutions, Inc.

ShowCase vBulletin Plugins by Drive Thru Online, Inc.