I got a Volvo
2003T( Saildrive) in my boat and need to replace the engine
mounts. I bought some Polyflex aftermarket mounts. The original mounts sit on a sort of 45 degree angle where the new ones have a adapter plate so the mounts sit straight up and down.
the fitting instructions .
On my motor
now there is a cradle( frame) that goes from one motor
mount to the other which is the original setup. It looks like that cradle
has to go when I fit the new ones. I could call Polyflex but it is Easter and I thought maybe somebody here has the answer.
Happy Easter everybody :-)