Cruisers Forum

Join CruisersForum Today

Thread Tools Rate Thread Display Modes
Old 13-04-2008, 03:34   #1
Registered User

Join Date: Apr 2008
Posts: 1
Volvo 2002 engine mounts

I suspect that there is a problem with the aft engine suspension mounts on a 2002. How should I test the mounts and what "defects" should I expect to see? The "big" problem was that the Volvo stern gland was ingesting air!!! Engine alinement is OK, shaft checked for straightness, cutlass bearing and Volvo stern gland replaced....but it still ingests air!!! It would seem to only leave the engine mounts. The port side aft mount "seems" to be able to spin in the rubber, but is not detached from the mounting plate or cracked. You views would be very much appreciated. Thanks Ian.
ianjbryan is offline   Reply With Quote


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Generator Engine Mounts Selection avazquez Construction, Maintenance & Refit 4 23-02-2018 13:59
Corroding Engine mounts ccannan Engines and Propulsion Systems 6 28-09-2015 23:13
Need Engine Mounts and Instrument Panel Dream Maker Engines and Propulsion Systems 5 26-02-2014 13:12
Engine Mounts For Perkins cburger Engines and Propulsion Systems 12 15-01-2008 21:51
Engine mounts - When to replace? dkall Engines and Propulsion Systems 5 13-01-2007 03:49

Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -7. The time now is 04:48.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2018, vBulletin Solutions, Inc.

ShowCase vBulletin Plugins by Drive Thru Online, Inc.