throttle selector not functioning

[DDowling]

For some reason the engine goes into reverse gear normal, but no throttle can be selected.

The throttle lever only goes as far as gear selection but no further.

Note: The Forward gear and throttle works perfectly fine.

We've removed the cover from the throttle control at the helmsman's position to check the throttle levers/cables. It appears okay there with levers not interfering with the housing.

Any suggestions/ideas would be appreciated.. thanks..

[GordMay]

Greetings and welcome aboard the CF, DDowling.

[zeehag]

your cables have another end. make sure that other end is connected and no kinks or tight bends in your morris cables.
goodluck
welcome.

[roland stockham]

Cables stretch and go out of adjustment. If the leaver moves full range probable needs re-setting up. If the leaver wont go back somthing is jamming the cable. Not in the pump or it would not rev in ahead

[DDowling]

thanks Roland. It does feel like something is jamming but can't see anything obvious. We'll pull things apart a bit further and see what else we can find.