Cruisers Forum
 


Join CruisersForum Today

Reply
 
Thread Tools Search this Thread Rate Thread Display Modes
Old 17-09-2019, 11:21   #1
Registered User

Join Date: Oct 2008
Posts: 278
Speedseal

Anyone got a source for the o-rings on these things. I'm down to my last spare for a g-65 pump. Bob
__________________

roberttigar is offline   Reply With Quote
Old 17-09-2019, 11:23   #2
Registered User

Join Date: Dec 2016
Location: Brazil
Boat: Custom Swedish Vindö 50 (35 ft)
Posts: 615
Re: Speedseal

Following...

It seems Speedseal is out of business. I hope someone takes over and re-opens to supply customers.
__________________

Copacabana is offline   Reply With Quote
Old 17-09-2019, 11:33   #3
Registered User

Join Date: Jan 2011
Location: UK/France
Boat: Gib'Sea 402
Posts: 354
Re: Speedseal

It's unfortunately a common problem. The o-rings are of course specific to the type of pump and the usual suggestion is to very carefully measure the overall diameter and thickness then look on-line for generic o-ring suppliers.
hoolie is offline   Reply With Quote
Old 17-09-2019, 12:37   #4
Moderator
 
Jim Cate's Avatar

Join Date: May 2008
Location: cruising SW Pacific
Boat: Jon Sayer 1-off 46 ft fract rig sloop strip plank in W Red Cedar
Posts: 15,094
Re: Speedseal

On my SS the o-ring is of very small cross section, and I was unable to find a replacement here on the east coast of Oz. The SS is on my spare pump, so I gave up looking some time back. If anyone does find a source, I'd be glad to know of it.

Jim
__________________
Jim and Ann s/v Insatiable II back in the water, stooging around Moreton bay for a while.
Jim Cate is offline   Reply With Quote
Old 17-09-2019, 12:51   #5
Registered User

Join Date: Apr 2011
Boat: center console
Posts: 162
Re: Speedseal

How about this?

https://www.amazon.com/Splicing-Kit-...%2C191&sr=8-19
1affiah is offline   Reply With Quote
Old 20-09-2019, 05:27   #6
Registered User

Join Date: Jul 2010
Location: Oriental, NC USA, Sailing Capital of Eastern North Carolina
Boat: None presently
Posts: 65
Re: Speedseal

O-rings are as generic as can be. Measure the cross section of the o-ring and the inside diameter. These measurements can be taken from the groove on the pump cover. Order online from a half dozen suppliers in SAE or Metric. I have used allorings.com. O-rings can have tolerances of up to 10%.
__________________

FPNC is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Speedseal orig vs. Speedseal life jbinbi Engines and Propulsion Systems 5 14-10-2016 09:30
Speedseal for Northern Lights 9kw 60Hz genset Catalysis Electrical: Batteries, Generators & Solar 10 04-08-2016 14:17
Mahe 36: Speedseal Life - Any feedback? kitingcakes Fountaine Pajot 14 03-08-2015 11:00
Speedseal ? delmarrey Plumbing Systems and Fixtures 19 12-12-2010 19:13

Advertise Here


Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -7. The time now is 18:38.


Google+
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
×

ShowCase vBulletin Plugins by Drive Thru Online, Inc.