Cruisers Forum
 


Join CruisersForum Today

Reply
 
Thread Tools Rate Thread Display Modes
Old 10-10-2015, 13:10   #1
Registered User
 
Lars_L's Avatar

Join Date: Jul 2011
Location: Boat: West coast of Norway Winter: Höllviken, Skåne, Sweden
Boat: H 30
Posts: 156
Replacing the engine

I have come to the conclusion that I need to replace my engine. But the boot is on the hard in Egersund in Norway and now during the winter I is in Höllviken in the south of Sweden. If I drive up to Egersund it will be 1000 km one way. (For those that aren’t familiar with the unit, as comparison the distance between the equator and the North Pole is 10000 km).

The engine that today is in the boot is a Yanmar YSB12. According the handbook it measures, length from the clutch 638 mm, width 673 mm and height 485 mm. I have a straight shaft that tilts 13.5°. (Weight 130 kg)

One of the engines that I have looked at is Lombardini LDW 1003 M. It measures, length 643 mm, width 488 mm and height 512 mm. (Weight 115 kg)

The question is, will that engine fit in my engine room?
As I remember I do have some space in length and height but nothing in width. Do I need more measures before its possible to say if it fits? If I get a gearbox with a clutch that tilts 7°, would that help?

I know that the propeller could be a problem. Today I have a two blades Autoprop Ø 400 mm. That is Autoprops second largest. I have got preliminary information that with that propeller I can have a 30 hp engine. In worst case I can have a three blades Autoprop Ø 400 mm.
__________________
Lars_L is offline   Reply With Quote
Reply

Tags
engine

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Help Please! Replacing Engine! Greg Debi Josh Engines and Propulsion Systems 6 31-12-2011 06:13
Replacing Engine - Norseman 447 sypsyche Engines and Propulsion Systems 16 07-01-2010 10:06
Replacing Inboard Engine with Electric Motor boat_alexandra Engines and Propulsion Systems 10 30-12-2009 21:50
Replacing Mounts w/o Pulling Engine AaronJ Engines and Propulsion Systems 10 09-05-2009 22:04
Advice needed on repairing or replacing our engine jibs up General Sailing Forum 33 05-02-2009 11:21



Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -7. The time now is 19:54.


Google+
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.

ShowCase vBulletin Plugins by Drive Thru Online, Inc.