Visit our Popular Forums

Madrugada · 25-12-2015, 02:35

Hi Gents & Ladies,

I've recently acquired an Endurnace 35 with a Perkins 4.108 engine, it has been sitting in the water for 4 years. Can anyone give me advice on how to get a copy of the manual for the Perkins 4.108 along with the gear box manual.

Or where I might purchase such items

Thanks

ctl411 · 25-12-2015, 04:00

Google Perkins 4-108, lots to download.

Madrugada · 25-12-2015, 04:41

Thanks for that, Had a look it has the PDF copy's which are not very clear

shakey doug · 25-12-2015, 14:47

The 4108 came out with many makes & models of Gear boxes of both Hydraulic & manual shift configuration.

**Lepke** · 25-12-2015, 22:46

Try ebay. Also these engines were in many tractors, ran generators and industrial uses. The only big difference is the injector pump and whatever it's driving (transmission, generator, pump).

Madrugada · 25-12-2015, 22:56

Ok.....I forgot e-bay,

Here's another question !!! not sure where on the planet people are on these thread's but il looking for a hard stand and a yard were I can work on the boat the location of the boat is in Civitavecchia Rome, Italy I believe if you go South of the airport Fiumicino there is some yards along the river

Has anyone got experience in this area of Rome, the cost of hard stands access to work shops etc....

It might be the wrong forum for this question

exMaggieDrum · 26-12-2015, 08:13

I have an original 4.108 manual. It is hard to read. It covers more than one motor type. It has pictures of every model except the one I have. Or it shows multiple pictures and you have to figure out which one applies to you.

I've attached three pdf docs I have for you though, including one for the CAV fuel pump. You may have another one. Good luck.