Cruisers Forum

Join CruisersForum Today

Thread Tools Rate Thread Display Modes
Old 20-04-2012, 15:49   #1
Registered User

Join Date: Sep 2008
Location: Clyde,scotland.
Boat: seadog 30
Posts: 33
oil pump

Hi,i have had a lot of trouble with the oil pump on my perkins 4107,twice the oil pressure relief valve opened and would not reset,i stripped it down and came to the conclusion that the spring was weak,so i made a spacer 3/8"long,reasembled it,fitted it and hey presto no oil pressure,removed it made a drive shaft with a 1/4"tang to fit in the end of pump shaft,to power it with my power drill,set the pump in vice and at 1000 revs had oil pressure,so i now have oil pressure on the bench but no pressure in engine,i only wish i could afford a new engine,iam really pissed off,any ideas? Ronnie.
bigman1 is offline   Reply With Quote
Old 20-04-2012, 17:33   #2
Registered User

Join Date: Dec 2008
Location: ontario canada
Boat: grampian 26
Posts: 1,743
Re: oil pump

If the engine is on the bench watch the drive tang while your faithful assistant bars the engine over. If it isn't turning, dig deeper.
perchance is offline   Reply With Quote
Old 20-04-2012, 19:36   #3
Registered User

Join Date: Nov 2011
Location: Montegut LA.
Boat: Now we need to get her to Louisiana !! she's ours
Posts: 3,421
Re: oil pump

If it pumps on the bench then the drive on the engine is caput ! ya need to grab hold of the drive shaft and turn it by hand, if it turns its broke, and needs to be repaired ! simple ! it's gear driven so should not turn except when the engine do !! Ck it Im sure your drive is bad ! just my 2 cents
Bob and Connie
bobconnie is offline   Reply With Quote

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -7. The time now is 09:44.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.

ShowCase vBulletin Plugins by Drive Thru Online, Inc.