Cruisers Forum
 


Join CruisersForum Today

Reply
 
Thread Tools Search this Thread Rate Thread Display Modes
Old 21-11-2018, 02:15   #1
Registered User
 
YARGESOL's Avatar

Join Date: Oct 2014
Location: San Carles de la Rapita,Spain
Boat: Imexus 28, Malcolm Tennant 46 Timeliner cat
Posts: 171
Keihin Yamaha identification

Greetings,cruisers! I'm cleaning & tuning my outboard Yamaha F20 carburator.
This is BCM Keihin 6AH00 W102 - all what's shows. How to determine the model of the carburator, in order to get a repaire kit ? Youtube video reccomends:" Check the Keihin logo - to be sure that this is original Keihin, note the serial no and,call the dealer". My Yamaha had visited few repair shops from Florida to Spain. Recently, I found one gasket (was convicted in Bermuda) still in same conditions - cracked. I would like to do this jobe better myself, like in a blessed time, when I was cleaning my Lada carburator's jets or
adjusting the ignition in the field. There are no dealers at the anchorage... There is plenty of kits at amazon/ebay but, mostly for motos.
Thanks
YARGESOL is offline   Reply With Quote
Old 21-11-2018, 03:36   #2
Registered User

Join Date: Dec 2009
Location: Australia
Boat: building Roberts Mauritius 43ft
Posts: 397
Re: Keihin Yamaha identification

Did you read the owner's book (manual)?

http://www.yamaha-motor.com/assets/s...07-17_1378.pdf


Here is a drawing of a F20 carburetor

https://www.megazip.net/zapchasti-dl...retor-13090638

Look at drawing to see if gasket is the right for your motor. If it is right for your carburetor you can order it and the cost is $12.22 American dollars.


Clive
coopec43 is online now   Reply With Quote
Old 21-11-2018, 05:30   #3
Registered User
 
YARGESOL's Avatar

Join Date: Oct 2014
Location: San Carles de la Rapita,Spain
Boat: Imexus 28, Malcolm Tennant 46 Timeliner cat
Posts: 171
Re: Keihin Yamaha identification

Thank you, Clive, for the link. So,I should follow Yamaha 6AH model number and,do not chase for Keihin. At the moment I need manifold gaskets, which are cheap. And, I may need to change a prime starter assy 6AH-14380-01-00 which is extrymely expensive! The problem I have now is, that the motor starts normally while vertical (on hook) , but if tilted for beaching it pass the gasand overfill the chamber. So, leaving the beach, I may need to take off the hood to start it.
YARGESOL is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Yamaha 8 hp vs Yamaha Enduro 8 hp bsobo Auxiliary Equipment & Dinghy 0 27-11-2011 10:22
Mystery Plug Identification and Shower Drains? Jetexas Monohull Sailboats 4 12-08-2009 15:09
fish (shark) identification please Rastarea Fishing, Recreation & Fun 23 10-02-2009 07:04
Boat Identification Guides GordMay The Library 0 26-07-2007 03:53



Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -7. The time now is 00:19.


Google+
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2018, vBulletin Solutions, Inc.

ShowCase vBulletin Plugins by Drive Thru Online, Inc.