Cruisers Forum

Join CruisersForum Today

Thread Tools Rate Thread Display Modes
Old 22-01-2016, 07:00   #16
Registered User
Muckle Flugga's Avatar

Join Date: Apr 2008
Location: Aboard the Ocean wave
Boat: 55' sloop.
Posts: 1,426
Re: Hooking up perkins

Originally Posted by DougR View Post
What you are missing is a small plate that slides along and clamps to the black metal rod. This plate has the actual cable clamp mounted on it. You connect the inner rod of the throttle cable to the throttle arm, and the outer housing of the cable to the cable clamp which is on the sliding plate. Then position everything correctly and clamp the plate to the rod. The throttle cable should be a type "33" cable.

If you google "Yanmar 4JH engine" you can find a picture of this type of cable anchor arrangement.

The stop cable is a simple pull cable with a "T" handle on one end and the engine stop lever on the other end. It can be anchored to the same sliding plate as the throttle cable.

I am not familiar with this specific engine model. And thanks for the clarification. I was having trouble figuring out precisely the location of the morse flange, and the one above the levers as I said didn't seem in the correct position, it also explains the odd L shaped rod. Thx. What do you reckon as to the flange above the levers?

‘Structural engineering is the art of modeling materials we do not wholly understand into shapes we cannot precisely analyse as to withstand forces we cannot properly assess in such a way that the public at large has no reason to suspect the extent of our ignorance.’
Muckle Flugga is offline   Reply With Quote
Old 22-01-2016, 17:01   #17
Registered User

Join Date: Dec 2013
Posts: 70
Re: Hooking up perkins

Okey guys, got it. One more question about stop control lever. Im not sure if you can see it from the picture but its orientation is very stange i thing. Its position is rather horizontal so i really dont know how to lead the morse cable to it. Thirtle cable will be easy, using the black metal rod. But stop lever i dont know. I would have to lead somehow around the engine but the cable is rather rigid and very hard to bend. Any suggestions?

arecuk is offline   Reply With Quote
Old 22-01-2016, 19:39   #18
Registered User

Join Date: Dec 2013
Posts: 70
Re: Hooking up perkins

My next question is about raw water intake system. See attached picture. There is a T joint with open port between water pump">raw water pump and engine cooling system - what should I attach here? Some sort of anti siphon breaker?

I did some brief research on internet but im confused. Some friends told me its not neccessary as far as one part of the exhaust hose is 12 inches above water line, which i have. But to me exhaus hose is something different then raw water intake system, right?

My old volvo penta did not have any siphone breaker. But Id like to do proper job and have my new perkins installation safer.

How should i do in the simplest and cheapest solution possible? Remember im in guatemala.
Attached Thumbnails
Click image for larger version

Name:	image.jpg
Views:	58
Size:	426.5 KB
ID:	117266  

arecuk is offline   Reply With Quote


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Cruiseair questions on hooking up the wires to control panel sdowney717 Construction, Maintenance & Refit 2 29-06-2012 17:08
Hooking a 24 and 27 Battery Together Kayamore Electrical: Batteries, Generators & Solar 15 24-06-2012 09:19
Hooking up AIS to OpenCPN aroett OpenCPN 5 23-02-2012 15:03
Hooking Your GPS to Comport BigDawg99 Navigation 10 30-08-2011 20:46
Hooking up an inverter Sonosailor Electrical: Batteries, Generators & Solar 3 25-11-2003 07:49

Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -7. The time now is 05:46.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2018, vBulletin Solutions, Inc.

ShowCase vBulletin Plugins by Drive Thru Online, Inc.