Cruisers Forum

Join CruisersForum Today

Thread Tools Search this Thread Rate Thread Display Modes
Old 31-05-2014, 10:03   #1
Registered User

Join Date: Oct 2013
Location: Kingston, Ontario, Canada
Boat: Columbia, 8.3 and 8.7 (1977)
Posts: 165
Atomic 4 replacement with Yanmar 2qm15

The exhaust output at the mixing elbow on my Yanmar 2qm15 fits a 2 inch ID hose. The uplift on my boat is 1 1/2 od. Is it Ok to step down from 2 inch to 1 1/2 on the exhaust line. Hose going from the uplift to output at transom is also 1 1/2. I'm just thinking of back pressure but not sure. Thanks
weephee is offline   Reply With Quote

2qm15, men, yanmar

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Removing oil from a Yanmar 2QM15 Jack Long Engines and Propulsion Systems 14 08-12-2018 14:38
Yanmar 2qm15 alternator upgrade Jack Long Electrical: Batteries, Generators & Solar 26 01-01-2013 00:13
Height of Atomic 4 Replacement gjordan Engines and Propulsion Systems 16 13-03-2012 08:31
Yanmar 2QM15 woes SailboatJimmy Engines and Propulsion Systems 11 18-07-2008 19:08
fuel injection problem Yanmar 2QM15 Bryanaw40 Engines and Propulsion Systems 5 30-07-2005 01:32

Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -7. The time now is 18:41.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2019, vBulletin Solutions, Inc.

ShowCase vBulletin Plugins by Drive Thru Online, Inc.