Cruisers Forum
 


Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on Cruisers Forums. Advertise Here
 
Thread Tools Search this Thread Rate Thread Display Modes
Old 04-07-2010, 07:48   #1
Registered User
 
Ocean Girl's Avatar

Join Date: Jun 2009
Location: In transit ( Texas to wherever the wind blows us)
Boat: Pacific Seacraft a Crealock 34
Posts: 4,115
Images: 2
Aternator Belt Tension

Anyone know where I can buy a qadget that helps you to tighten an alternator belt. I don't even know what the name of the tool is.

From what has been described to me, this tool holds the alternator belt inplace while tightening the appropriate bolts. I have a volvo MD2020, but don't think it matters.
Thanks,
Erika
__________________
Mrs. Rain Dog~Ocean Girl
https://raindogps34.wordpress.com
Ocean Girl is offline   Reply With Quote
Old 04-07-2010, 08:14   #2
Moderator Emeritus
 
nigel1's Avatar

Cruisers Forum Supporter

Join Date: Oct 2009
Location: Manchester, UK
Boat: Beneteau 473
Posts: 5,589
Belt Tension gauges range from a few dollars to lots of dollars, and should be available from most motor factors, in the USA , could try NAPA. They should also be be able to advise you on type to use, and I think that NAPÅ also hire out tools, so may be the way to go.
Rule of thumb, grip belt midway between the pulleys on its longest length, and if you can twist the belt through 90 degrees, your about right
__________________
Nigel
Beneteau 473
Manchester, UK
nigel1 is offline   Reply With Quote
Old 04-07-2010, 08:19   #3
Registered User
 
maxingout's Avatar

Join Date: Dec 2006
Location: Cruising
Boat: Privilege 39 Catamaran, Exit Only
Posts: 2,723
I had trouble with slipping alternator belts on my Balmar 90 amp alternators, and for a period of time I went through lots of belts.

Then I discovered ribbed belts. Ribbed belts are magic on Exit Only. No more alternator belt squeal, and the belts last a very long time. Those transverse grooves in the ribbed belt work wonders. Until I used ribbed belts, I had the same problem as you. I fought to make the belt tight enough so that it would not slip and self-destruct.

It frequently comes down to one of two solutions. Either install dual pulleys and use non-ribbed belts, or stay with a single pulley and use a ribbed belt.

That's the way it is on Exit Only.
__________________
Dave -Sailing Vessel Exit Only
https://RealOceanCruiser.com
https://PositiveThinkingSailor.com
maxingout is offline   Reply With Quote
Old 04-07-2010, 08:20   #4
Senior Cruiser
 
skipmac's Avatar

Cruisers Forum Supporter

Join Date: Oct 2007
Location: 29° 49.16’ N 82° 25.82’ W
Boat: Pearson 422
Posts: 16,306
If I read correctly you are looking for a tool to hold the alternator belt tension while you tighten the bolts, not to measure the belt tension?

The tool I use is called a hammer or sometimes a small crowbar or even a large screwdriver.

Just use any tool that can fit between the alternator body and the engine block, alternator bracket or other convenient, sturdy location, use as a lever to push out the alternator while tightening the appropriate bolt. If set up correctly should be easily accomplished with one hand for each.
__________________
The water is always bluer on the other side of the ocean.
Sometimes it's necessary to state the obvious for the benefit of the oblivious.
Rust is the poor man's Loctite.
skipmac is offline   Reply With Quote
Old 04-07-2010, 08:26   #5
Registered User
 
captain58sailin's Avatar

Join Date: Mar 2009
Location: Homer, AK is my home port
Boat: Skookum 53'
Posts: 4,042
Images: 5
If you go to the ribbed belt, be careful not to over tighten. They do not require the same tension as a non ribbed belt.
__________________
" Wisdom; is your reward for surviving your mistakes"
captain58sailin is offline   Reply With Quote
Old 04-07-2010, 08:42   #6
Registered User
 
svHyLyte's Avatar

Join Date: Mar 2006
Location: Tampa Bay area, USA
Boat: Beneteau First 42
Posts: 3,961
Images: 25
I use a small turn-buckle (from the hardware store) that fits between the engine block and the alternator when the turn-buckle is retracted. One can then turn the center-piece to extend the "legs" which apply tension to the belt to the desired level. Its worked for 40 years...
__________________
"It is not so much for its beauty that the Sea makes a claim upon men's hearts, as for that subtle something, that quality of air, that emanation from the waves, that so wonderfully renews a weary spirit."
svHyLyte is offline   Reply With Quote
Old 04-07-2010, 08:46   #7
Registered User
 
captain58sailin's Avatar

Join Date: Mar 2009
Location: Homer, AK is my home port
Boat: Skookum 53'
Posts: 4,042
Images: 5
That is a great idea!!
__________________
" Wisdom; is your reward for surviving your mistakes"
captain58sailin is offline   Reply With Quote
Old 04-07-2010, 08:55   #8
Registered User

Join Date: Jun 2006
Posts: 724
belt tension should be 1/4" deflection for every 6"s of open length of belt ie: if yopu have 12"s of belt free from pulley to pulley then there should be 1/2" deflection
mike d. is offline   Reply With Quote
Old 04-07-2010, 09:11   #9
Registered User
 
Therapy's Avatar

Join Date: Jul 2007
Location: W Florida
Boat: Still have the 33yo Jon boat. But now a CATAMARAN. Nice little 18' Bay Cat.
Posts: 7,086
Images: 4
Some of ya'll can't read.

She is trying to pull the tension with something, not figger out how tight it should be.

I use a big screw driver.
Therapy is offline   Reply With Quote
Old 04-07-2010, 09:40   #10
Registered User
 
Vasco's Avatar

Join Date: Apr 2004
Location: Toronto
Boat: CS36Merlin, "La Belle Aurore"
Posts: 7,557
Ocean,

You might find a spreader in an automotive store. Here's a pic of a guy who used what looks like a woodworking clamp, available at HD.

__________________
Rick I
Toronto in summer, Bahamas in winter.
Vasco is offline   Reply With Quote
Old 04-07-2010, 10:30   #11
Registered User
 
captain465's Avatar

Join Date: Mar 2007
Location: Ft Lauderdale, FL
Boat: 43 ft Selene/Solo
Posts: 688
OG,
Look in an automotive supply store.........they will probably have what you need.......similar to the turnbuckle that was described earlier, but with "saddles" om both ends that fit onto the pulleys. I have one that I got through Harbor Freight, cheaply made, but more than up to the task. About 10 or 15 dollars as I recall.
__________________
Do not go where the path may lead.........
go instead where there is no path........
and leave a trail.
Ralph Waldo Emerson
captain465 is offline   Reply With Quote
Old 04-07-2010, 11:37   #12
Senior Cruiser
 
GordMay's Avatar

Cruisers Forum Supporter

Join Date: Mar 2003
Location: Thunder Bay, Ontario - 48-29N x 89-20W
Boat: (Cruiser Living On Dirt)
Posts: 49,143
Images: 241
That looks like Rick Berman’s $2.99 “reversible wood clamp”.
Pulley spreader- on the cheap

Here’s another spreader clamp ➦ Lee Valley Tools - Important Announcement
__________________
Gord May
"If you didn't have the time or money to do it right in the first place, when will you get the time/$ to fix it?"



GordMay is online now   Reply With Quote
Old 04-07-2010, 12:54   #13
Registered User

Join Date: May 2009
Location: Vancouver, Wash.
Boat: no longer on my Cabo Rico 38 Sanderling
Posts: 1,810
Send a message via MSN to John A
Quote:
Originally Posted by skipmac View Post
If I read correctly you are looking for a tool to hold the alternator belt tension while you tighten the bolts, not to measure the belt tension?

The tool I use is called a hammer or sometimes a small crowbar or even a large screwdriver.

Just use any tool that can fit between the alternator body and the engine block, alternator bracket or other convenient, sturdy location, use as a lever to push out the alternator while tightening the appropriate bolt. If set up correctly should be easily accomplished with one hand for each.
In a former life this worked on all sorts of farm equiptment.

I'm sure the reference to hammer is the use of the handle as a lever to apply tension to the belt while tightening the bolt on the bracket.
John A is offline   Reply With Quote
Old 04-07-2010, 15:47   #14
Registered User
 
captain58sailin's Avatar

Join Date: Mar 2009
Location: Homer, AK is my home port
Boat: Skookum 53'
Posts: 4,042
Images: 5
The reversed clamp would allow you to set your deflection and tighten the bolt with a minimum of fuss and no straining with one hand and trying to tight the bolt with the other hand and eliminate the swearing when you drop the wrench in the bilge. Okay you could still drop the wrench, but maybe you won't with two hands free.
__________________
" Wisdom; is your reward for surviving your mistakes"
captain58sailin is offline   Reply With Quote
Old 04-07-2010, 15:49   #15
Eternal Member
 
Chief Engineer's Avatar

Join Date: Aug 2006
Location: North of Baltimore
Boat: Ericson 27 & 18' Herrmann Catboat
Posts: 3,798
You tighten the belt until untill you cannot turn the alternator with hand pressure.

I see way too many overtightened belts......and the corresponding water pump failures.
Chief Engineer is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Help - Need V-Belt Tension Advice ! jimbim Engines and Propulsion Systems 10 12-05-2010 01:45
Raymarine Radar Belt Problem Want to sail Marine Electronics 5 25-11-2009 12:24
Percentage of Pulley in Contact with Belt Stevens 47 Engines and Propulsion Systems 6 26-04-2009 11:04
Looking for belt driven autopilot Bombay 31 General Sailing Forum 0 05-09-2008 05:12
Galley Belt Charlie Cooking and Provisioning: Food & Drink 12 01-03-2008 21:33

Advertise Here


All times are GMT -7. The time now is 07:49.


Google+
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.

ShowCase vBulletin Plugins by Drive Thru Online, Inc.