2715e Ford Diesel engine Idle Speed Adjustment

[Ian Streten]

Not sure if this has been covered before but am looking for some advise on how to adjust the Idle Speed on my 2715e Ford Diesel Engine. It is a Watermota marinisation but don't think this is really relevant. Any help gratefully received


Sent from my iPad using Cruisers Sailing Forum

[GordMay]

Shop Manual ➥ http://www.uktractorpulling.co.uk/nu...hop_Manual.pdf

[SeaSon]

10mm socket and extension. The adjustment bolt is between the engine and the injector pump. 2 screws, one is idle, one is max rpm. 650 rpm tops.

Sent from my SAMSUNG-SGH-I537 using Cruisers Sailing Forum mobile app

[Ian Streten]

Originally Posted by SeaSon

10mm socket and extension. The adjustment bolt is between the engine and the injector pump. 2 screws, one is idle, one is max rpm. 650 rpm tops.

Sent from my SAMSUNG-SGH-I537 using Cruisers Sailing Forum mobile app

I understand that you cannot 'Thank' more than once on the same thread so I am replying. Today I got into the engine room, found the idle speed adjustment screw, as you described & adjusted the speed accordingly & all is now well again. Thank you once more for your invaluable help