FP Cat
yanmar with sea drives. Noticed steam in starboard
exhaust, changed
water pump, mixing
elbow, no improvement. End of season when hauled I noticed a lot of growth around intake and figured I found the problem. The bottom was painted and I assumed the blockage was removed. I did not request this but
boat was launched and the problem continues. Is it possible to clean the port on the sea drive without hauling. I pulled the hose and could blow through easily. Or could it be clogged tubes in the
heat exchanger. Any suggestions would be great.
Sent from my
iPad using Cruisers Sailing Forum
Linear Mode
Recent Discussions