1966 Ted Hood...engine mount replacement

[Reb Blanchard]

I am looking for a source for replacement engine mounts on my 1966 Ted Hood Auxiliary Racing Sloop.

Engine is a Ford Series 590E 6 cyl. Existing mounts are dual stud with 3 inch spacing, and mounting holes are 7 inch spaced.

I am struggling to find anything matching this dims.

Does anyone have a source for mounts matching older boat specs?

Many thanks,

Reb
S/V Siren Song
Bayfield, WI

[mike d.]

Pics would help in identification !

[Reb Blanchard]

Mike, thank she reply. Please see the attached.

Thanks for your thoughts.

Reb

[AiniA]

If you can't find them it would seem not to hard a project for a machine shop.

[Suijin]

I would look into a local machinist shop, having them fabricated. They are not a close tolerance item And they could bang them out fairly quickly. I doubt you’ll find matching mounts out in the market at this point.

[Reb Blanchard]

Thanks for the input.

Upon further investigation, I found these mounts were apparently designed to be "re-built." The rubber feet can be removed/replaced. So, now looking for rubber fabricators who can provide replacements.

[Triumphant]

Have you tried PYI, https://www.pyiinc.com/engine-mounts.html, they sorted my (non standard Perkins mounts)

[Reb Blanchard]

Yes, thanks. I had looked at the R&D mounts initially and they do not offer a foot print which matches the original mounts.