Hi just wondering what people think about this idea have a 38 ft catamaran
and have 20 hp Honda
4stroke outboards that have just broken there slide mechanism it was made out of c section 3 mm aluminum
and this split the c section. Want to make it stronger so have two options to make it out of heavier material tells was 3 mm and l have the option to make it out of 6 mm. The other option is to use ronstan t section rail with sliders see link below. These have a mwl of 1000kg and a bl of 2000kg the motors weigh 50 kg but when they'd re running not quite sure what sort of pressure they would make the boat weighs in at 4.5 tonne. Any help or advice would be appreciated.
RC7320-6.0 |Ronstan Marine Division
T-Track Traveller System*Series 32mm, Cars**| Ronstan Marine Division
The car l would use is the Rc73201