Originally Posted by geoffr
I'm drooling over your head.. just sooo much nicer than our Prout's run-down head
Is your head really mounted on an angle, or has SaltyMonkey been drinking too much funny water
Our head is mounted straight which works well in a seaway as I can brace my knees on the outer wall (which I need to in order to stay put!)
Another note - I'm not sure how your tank goes overboard
.. you may want to consider a gravity drain mounting if you push it up the wall slightly.. then a thru-hull just at your sub-floor (which looks to be the ~waterline). This works very well for us!
the head is more or less parallel with the panelling at seat level so might appear slightly turned inboard at base level,also as I had to change bowls from regular jabesco to mini bowl it was not attached to the base at the time of the photo
,so could have been not quite square on the base!
the locker floor is raised quite a bit above the waterline~15 inches or so and the holding tank
has a 50mm drain so hopefully this should work as a gravity drain system ok
I changed the standard locker door size and floor by raising the lower door sill so that all the skinfittings are contained in a watertight compartment should there ever be a leak,the shower sump
pump should also fit nicely in there as well