Quote:
Originally Posted by Moogli
Dear Belizesailor, I cant seem to be able to get by front speakers in the Maxim out, they seem to be glued into place no way of unsrewing them. I have tried the fade button no luck
|
Often there is a trim cover on the front of speakers that pops off exposing screws or the screws may be visible from the front or may have small plugs covering the screw holes which can be popped out with a small sharp object. Look and see if you find any of the above.
Looking up the make/model of speaker online and finding
installation instructions may help too.
Can you get a look behind the speaker? Look for the ends of screws or
adhesive and that may give you and idea of how they are installed.
Hopefully they were not installed using "Devil's Glue" (5200).
I assume the problem is that the front speakers aren't working? If so, connect a known good speaker to the same channel on the stereo with a short section of
wiring (you only need one to test each side of the front channel). If no sound then either the stereo is not working properly or is configured improperly (the manual will be of help here, which you can probably find online). If sound then its the
wiring or the speaker....islolate and test to determine which.