i have a
Farymann Diesel A30
motor that i got going that wasnt in use for the past 10 years. just needed hoses and a tank. i put a 3 prop on it as well when i got it going. however , when driving at the higher rpms , 80% trottle, i can hear a like grinding in the Nanni
transmission and i just ease back off it to stop it and ride it back at around 65% and lower where there is no grinding sounds. was using the
motor for the past 4 yrs like this and i just dont ride it at high throttle. love these motors. These one cylinder bangers sound amazing and so reliable everytime. i'm not sure if i have to put grease in the grease nipple near the tranny or if it was the 3 prop that could be stressing the tranny at higher speeds..Any input would be greatly appreciated. video of one simillar to mine attached. Thanks is advance. Cheers, Troy.
https://youtu.be/g0qXh6c0oho
Linear Mode
Recent Discussions