I have just finished repainting the hulls of my catamaran
.For this project
I used Resene Uracryl 400 series of paint.I used a mohair roller, those small 125mm ones? It worked great and in my opinion is probably better than the Altex brand as far as rolling an tipping goes.To be honest I just went over the bubbles in the wet paint with an unloaded roller after a couple of minutes and this got rid of most bubbles.I prefer not using a brush for tipping most of the time as this can leave striations in the paint. I did the job outside and was caught out with a rainshower wihich has left a few lighter water
marks that i will have to redo.Remember to add a bit more thinners for the final coat as this brings out the shine.