aquagen

[slusketass]

I have an old aerogen 4 and wishes to fit it for use as an aquagen. Have anyone any thoughts about the subject?

As I understand the Aquagen and the Aerogen are quite similar, exept for the fitting. Therefor is should be possible to fabricate the holding to make it fit on the pushpit as an aquagen with a rope and propellor instead of the windrotor.

Any thoughts?

[CSY Man]

have an old aerogen 4 and wishes to fit it for use as an aquagen. Have anyone any thoughts about the subject?

He-he, no idea what ya are talking about Mr. SluskeSlaskeTass.

Either ya hit the crack pipe one time too many, or ya have a serious quastion that nobody can relate to.....

Good luck anyway.

CSY Man...Densomtørderandretier.

[slusketass]

hehe, ok.

Aerogen 4 is a windgenerator. Aquagen4 is a water towed generator.

Now, these two really have the same generator, the difference is how they are attached to the boat, and how the generator is powered, from wind or water.

Aerogen have now made a combination of these two, but I already have a windgenerator, so what I wanted was tips regarding rebulding my aerogen to fit also as a water towed generator.

But I guess, if anybody knows how to do this, they'd probably understood my last post....