I have a 1999 Silverton 352 with crusader 454 xli gas engines. Saturday the port
engine died and would not start back up. I was only getting 6v to the ignition switch. After tightening some ground
cables I got 12v again and she started up fine. Sunday morning she started up but cut off after a few seconds. Then I had 0v at the port ignition. Troubleshooting throughout the day I would get 12v again and she would start and cut off after a few seconds. The port ignition voltage would be at 0 again, sometimes ~2 volts. If I jump the
power from the starboard ignition switch the port
engine starts fine.
Any ideas besides ground cable? The
battery is fine.