Cruisers Forum

Join CruisersForum Today

  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on Cruisers Forums. Advertise Here
Thread Tools Search this Thread Rate Thread Display Modes
Old 05-02-2013, 16:41   #1
Registered User
Benronpro's Avatar

Join Date: May 2011
Location: S/W Australia
Boat: Oyster 435
Posts: 18
Dolphin/Farymann Gen wiring?

Was hoping someone may have the old Dolphin(VTE)/Farymann generator on board. It's the 4kva model. I've recently removed it from the boat to clean it up,service and change engine mounts. I disconnected all the VE connectors and hoses except when I pulled the engine from it's case the engine side of the remote control wires (inside the case) were still connected ( 7 in total), so the wires have pulled off the pins and now I have no idea which coloured wires go on which pins, the pins are labeled one to four A, and one to four B ( one must be blank).
I realize these generators are mostly going the way of the dinosaur so finding information online is hard. I'm based in Australia
Benronpro is offline   Reply With Quote


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -7. The time now is 00:49.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2019, vBulletin Solutions, Inc.

ShowCase vBulletin Plugins by Drive Thru Online, Inc.