BMW D50

[Tommee]

Hello, I have a BMW D50 with starter motor problems. It is a Bosch but is a reverse spin so very unusual. It is basically stuffed so desperately need a replacement. Any ideas please are much appreciated. I have contacted Richie in Canada & am awaiting a reply.
Thank you

[CarstenWL]

... do you have the Bosch part number? Also sent you a link via PM for one I found online here in Germany.

Carsten

[Tommee]

Unfortunately no...I have the part no in my workshop manual but suspect it is the BMW part no for it. The motor is in the workshop right now, due back shortly. It does have a lot of markings on the Bendix so maybe that could be of use. Thank you for reply.

[Tommee]

Just found a box with what I believe the spare Bendix was in. 1 ST/PC 31035 & below that 0 331 402 001.........also other numbers on box are 968 & 095121 ??

[CarstenWL]

... seems the numbers are

- Bosch 0001366026

- BMW 12411329906

Carsten

[Tommee]

Yes, the numbers are 1241 1329 906 so seems to be the one. I have looked up the 2 sites you sent, thank you! Can you tell me if the re-conditioned one is a Bosch? I could not understand that one. Having read a few threads it seems the after manufacture replacements are not all that good. There is a new CCW in the States but it is not much cheaper than the new Bosch. If the re-con is a Bosch that might be a less expensive option.

[Tricolor]

Googled.. ‎https://www.rareelectrical.com/i-268...1-366-026.html $392