Cruisers Forum
 


Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on Cruisers Forums. Advertise Here
 
Thread Tools Search this Thread Rate Thread Display Modes
Old 03-03-2019, 02:58   #1
Registered User

Join Date: Sep 2017
Location: Sydney, Australia
Boat: Beneteau Cyclades 39.3
Posts: 9
Beneteau Faulty Panel Meter

Hi all
I have a Cyclades 393 with an analogue panel meter that can show voltage (house + Start), Fuel level and water level using the switches below. The meter has stopped functioning however I appear to have all necessary voltages at the back of the meter when pressing the appropriate switches.
The question is, without going through Beneteau, what type of aftermarket meter could I install here? I would prefer to stay analogue. All comments gratefully received.

Gos
Attached Thumbnails
Click image for larger version

Name:	Panel meter.JPG
Views:	114
Size:	63.6 KB
ID:	187046  
Gos2017 is offline   Reply With Quote
Old 03-03-2019, 03:15   #2
Registered User

Join Date: Mar 2014
Location: Oz
Posts: 1,042
Re: Beneteau Faulty Panel Meter

Has the meter got a part number / brand on it, might be a VDO?
Bean Counter is offline   Reply With Quote
Old 03-03-2019, 03:54   #3
Registered User

Join Date: Dec 2009
Location: Australia
Boat: BUILT!!! Roberts Mauritius 43ft
Posts: 3,602
Re: Beneteau Faulty Panel Meter

I think you would probably battle to find a new gauge-3 in 1.

Could you get a new voltmeter and replace the dial with the one out of the old meter?

If you are prepared to do away with the switches and do a little rewiring there are some elegant solutions.

https://www.google.com.au/search?biw...z2pPYFv2_Z9mM:
coopec43 is offline   Reply With Quote
Old 03-03-2019, 17:57   #4
Registered User

Join Date: Dec 2009
Location: Australia
Boat: BUILT!!! Roberts Mauritius 43ft
Posts: 3,602
Re: Beneteau Faulty Panel Meter

Beneteau Oceanis Electrical Panel - Faults? - Cruisers & Sailing ...

www.cruisersforum.com › ... › Engineering & Systems › Marine Electronics
Dec 29, 2013 - 15 posts - ‎8 authors
On the rear of the panel the VDO PCB which is the LCD voltage/fuel/water gauge etc. module has "Carte Monitoring 010142" on a small white ...Beneteau fuel gage wildly wrong 15 posts 29 Jul 2017
Beneteau Oceanis 40 fuel gauge is inaccurate 15 posts 26 Oct 2015
Beneteau Oceanis 46 VDO electrical panel 7 posts 17 Sep 2013
VDO Water Gauge - Help 14 posts 7 Jul 2011


http://www.ybw.com/forums/showthread...104-Fuel-gauge
coopec43 is offline   Reply With Quote
Reply

Tags
beneteau

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Recommended SWR Meter for SSB - Panel Meter? seegem Marine Electronics 30 22-05-2017 10:41
Bilge Pump Panel with counter/hour meter zboss Plumbing Systems and Fixtures 6 30-03-2014 08:07
For Sale: 12 volt breaker/meter panel (New) over40pirate Classifieds Archive 1 22-07-2013 08:59
Panel-mount VSWR meter? Beausoleil Marine Electronics 0 27-08-2008 07:57
Faulty engine hour clock NoTies Engines and Propulsion Systems 1 24-04-2007 20:17

Advertise Here


All times are GMT -7. The time now is 10:33.


Google+
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.

ShowCase vBulletin Plugins by Drive Thru Online, Inc.