470: Roller for the sliding door lagoon470

[Aupalukii]

Hello ,

I m looking to change the rollers for the sliding door on my lagoon 470 can t find any replacement parts....any idea ?

Thanks

Franck


Envoyé de mon iPad à l'aide de Cruisers Sailing Forum

[feebs]

Hi,

Has anyone found a part number &/or source for the above rollers?

Thanks


Sent from my iPad using Cruisers Sailing Forum

[Aupalukii]

No sorry no luck for me....


Envoyé de mon iPad à l'aide de Cruisers Sailing Forum

[cashgar]

Did you try with beneteau USA?
I need to change the same part on my 410

[Aupalukii]

No, didnt try with beneteau USA still looking for the part....


Envoyé de mon iPad à l'aide de Cruisers Sailing Forum

[feebs]

No luck so far, although the new Australian dealer has been onto it for a week. Hopefully he has better 'luck' than our previous dealer! In the mean time, some silicone spray is allowing a smooth opening & closing.




Sent from my iPad using Cruisers Sailing Forum

[cashgar]

I Will check with beneteau USA dis week and will let you know if the can supplied new roller or not and price

Charles

[feebs]

Hi all,

Have received the following reply from a French supplier, suggested on another post.

Hello sir,
It should tell us the dimensions "A" and "C" of your truck with the help of the attached photo.


Cordialement
Mr.DALES


SUD ROULETTES SERVICES
Service commandes / 71 Impasse Des Tamaris / Le Diamant Bleu / Rubis / 83140 Six Fours Les Plages
Dépot / Retrait / 178 Avenue Henri Guillaume / 83500 La Seyne sur mer
Tel : 06.26.55.18.01 / Fax: 09.72.16.67.06
contact@sud-roulettes-services.com



I am away from my boat for several days - would someone post requested dimensions here?

Thanks Brett




Sent from my iPad using Cruisers Sailing Forum

[Aupalukii]

I did contact them already with the dimensions...no match


Envoyé de mon iPad à l'aide de Cruisers Sailing Forum

[cashgar]

I just order 2 roller from beneteau spare parts web site it will take 3 to 4 week to get them they will order them from france received them and after ship them to me

here is a list of lagoon listed on there web site sorryAupalukii you will need to call them your boat is not listed

they call the roller Runner for slidding door

Charles

[monte]

My door is a bit out of tilt and won't lock but the wheel seems to b maximum adjustment. How the hell does the door come out to check and change them?

[tuskie]

Hi Monte,
We removed our door, unnecessary, to adjust it. An Allen key can be inserted near top and bottom of door on the part that contacts the jamb. Turn the Allen key to raise or lower the wheel mechanism. If I remember correctly, there may have been black plastic covers over the access holes to hide them.

On second thoughts, it is probably a good idea to remove the door completely to clean debris that prevents the roller wheel turning. This is what causes it to wear in a flat spot. This allows you to better lubricate as well. We adjusted striker plate on jamb to help lock work smoothly, as well.

In France at the moment and picked up a new (spare) trampoline net in Bordeaux, like the one that Jen delivered to our L400 friends on "Gone Walkabout". Great service. Hope net proves to be as good as original.

Cheers.

[monte]

Thanks Tuskie. I did try to remove the door once before but gave up after an hour of fiddling around with it. I adjusted the rollers low then lifted the door but I think it still didn't clear the track and cabinet. I'll have another go at it. Currently the lock doesn't work and I have a jerry built repair by raising the track with tape and a skewer. It works but not the most attractive fix...

[tuskie]

Ah, the old "tape and skewer trick"! Necessity, the mother of invention.

Not onboard ATM so can't check or reliably remember, is the top of yours adjusted down? Perhaps that is why you couldn't remove door?

[feebs]

If I recall, to remove door....

Place towel or mat on floor ( door is quite heavy & there is very little head room once you get it out)

Lock open sliding window

Loosen, then lower black stopper at top of door (inside groove - on lock side of door).

On top door track you will notice 3 holes - one for locking sliding window closed, second for locking door closed & third to allow door removal. Open door about 70 mm & slide lock up such it goes into this third hole ( this ensures you have door incorrect position for removal). Now move lock down ( green showing on door lock) then lift door up. Move bottom of door inside cabin & lower onto towel/mat.

Door removed. 😄

To remove sliders you need to lay door on its side & unscrew the non lock side of door & take this section off glass - roller carriages then just slide out - may need a gentle tap.

Hope this helps,

Brett


Sent from my iPad using Cruisers Sailing Forum