Cruisers Forum

Join CruisersForum Today

Thread Tools Rate Thread Display Modes
Old 21-03-2010, 00:15   #16
Registered User
Dragon Lady's Avatar

Join Date: Mar 2010
Location: Sydney Australia
Boat: Etchells, 30ft Dragon Lady, Lavezzi 40, Pourpre
Posts: 946
No I believe the 37 is a shortened 42 albeit a well though out scaled down 42 not just a chopped down one.
What I was talking about is that there seems to be some boats that just get pontoon extensions and hey presto you have a bigger boat design which really has no more room then the original design.

Dragon Lady is offline   Reply With Quote
Old 12-07-2010, 19:18   #17
Registered User

Join Date: Jun 2008
Posts: 6
I have a 1994 model Lagoon 37 bought out of charter from moorings in 1999, she was termed a Moorings 3700. She was built by Jeanneau in France. The surveyor was also familiar with the TPI boats, and knew of no differences. There is an ID no impressed on the inside of the starboard hull aft by the manufacturer, but it does not conform to the format of the US HIN number, and I do not know what the numbers represent.

gchester is offline   Reply With Quote
Old 13-07-2010, 12:18   #18
Registered User

Join Date: Dec 2008
Boat: Just sold: Beneteau 373
Posts: 22

In looking at the original Jeanneau Lagoon 37 brochure and the Moorings 3700 brochure (called a "customized Jeanneau Lagoon 37" by the Moorings), the only big difference I could find was in sail area. The Moorings 3700 carried 85 sq.ft. less than the Lagoon 37; not surprising since it was in charter.
GOsail is offline   Reply With Quote
Old 16-12-2013, 17:26   #19
Registered User
R U WIVUS's Avatar

Join Date: Dec 2013
Location: Out there somewhere
Boat: Lagoon 3700
Posts: 2
Question Re: Lagoon 37 - TPI vs French-Built?

Hey guys.. We are new to the forum and have recently purchased a Lagoon 3700 moorings model built in France circa 1994... Our big problem at the moment is the prop nut has backed off the shaft and we lost the nut hardware along with the prop... We have been able to replace the prop but are hitting brick walls with replacing the crazy shaft nut system... It is a M16x1.5 fine thread shaft nut with a zinc attachment at the tip... Anyone with any type of info on a source for a replacement nut for this model out there? Thanks so much in advance..

R U WIVUS is offline   Reply With Quote

lagoon, lagoon 37, tpi

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
First Cat: TPI Lagoon ? cbcat Multihull Sailboats 19 22-04-2012 06:25
WTB: Lagoon 42 TPI cbcat Classifieds Archive 5 17-09-2009 12:07
42: Lagoon 42 (TPI) New Engines ? tfsilver Lagoon Catamarans 8 11-11-2008 16:05
Lagoon 37 (TPI) vs Privilege 39 SoonToBe Multihull Sailboats 6 30-05-2008 21:20
WTB: Lagoon 42 (TPI) Oz_Steve Classifieds Archive 0 21-05-2008 18:52

Our Communities

Our communities encompass many different hobbies and interests, but each one is built on friendly, intelligent membership.

» More about our Communities

Automotive Communities

Our Automotive communities encompass many different makes and models. From U.S. domestics to European Saloons.

» More about our Automotive Communities

Marine Communities

Our Marine websites focus on Cruising and Sailing Vessels, including forums and the largest cruising Wiki project on the web today.

» More about our Marine Communities

Copyright 2002-2015 Social Knowledge, LLC All Rights Reserved.

All times are GMT -7. The time now is 08:43.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2016, vBulletin Solutions, Inc.

ShowCase vBulletin Plugins by Drive Thru Online, Inc.