Cruisers Forum
 


Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on Cruisers Forums. Advertise Here
 
Thread Tools Search this Thread Rate Thread Display Modes
Old 26-07-2011, 20:44   #1
Registered User

Join Date: Jul 2008
Location: Vancouver, BC Canada
Boat: 380 Lagoon Catamaran
Posts: 6
Heat

Can anyone advise the best location to install an Diesel Airtronic Heater
on a 380 Lagoon, any info would be great including any pics available.
Coldest summer in years !!!!!!!!
westcoast is offline   Reply With Quote
Old 27-07-2011, 22:59   #2
Registered User
 
careka's Avatar

Join Date: Apr 2009
Location: Lindesnes,Norway
Boat: Lagoon380 Comfort#637
Posts: 716
Images: 2
Send a message via Skype™ to careka
Re: Heat

There are pictures in the Lagoon owner forum Yahoo.
They are placed in the engine room up under deck. but look at the pictures.
We have 2 x 5Kw eber wather heaters in ours. one in each hull

http://groups.yahoo.com/group/lagooncatowners/
careka is offline   Reply With Quote
Old 28-07-2011, 23:02   #3
Registered User
 
brainmaker's Avatar

Join Date: Aug 2010
Boat: None
Posts: 85
Re: Heat

You may not need to have two heaters. If you put one in - you may want to choose the port hull (against noise you don't want near your own bed). That is possible in the sense that there is plenty of space to duct big hoses from one hull to the other - I discovered lots of space under the cockpit floor - you can remove the vertical wood panels from the "bridgedeck side" of the aft cabins by undoing a few phillips screws.
brainmaker is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Balmar Regulator Failure phantomracer Electrical: Batteries, Generators & Solar 86 20-01-2013 04:53
Gel Coat Advice rhr1956 Construction, Maintenance & Refit 15 29-08-2011 13:34
I'm Committed Now . . . SabreKai Engines and Propulsion Systems 28 09-08-2011 14:40

Advertise Here


All times are GMT -7. The time now is 04:23.


Google+
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.

ShowCase vBulletin Plugins by Drive Thru Online, Inc.