Cruisers Forum
 


Join CruisersForum Today

Reply
 
Thread Tools Search this Thread Rate Thread Display Modes
Old 20-05-2018, 20:12   #1
Registered User

Join Date: Apr 2007
Location: New England
Boat: lagoon 380 s2
Posts: 580
380 S2 Holding tank vent location and other questions

Getting the boat ready for the season here, and realized as I was working on the head, I don't know where the holding tank vents are. Are the under aft end of the bridgedeck?

Also, my starboard locker in front of the mast has a drain from the hatch cover inside lip, but no hose to the bottom of the locker, my port locker has a hose going from the inside lip(don't know what this is called, it is the seating area of where the hatch edge goes) to a drain. see pic. But does this locker actually drain if it fills with water?

The stb locker has the drain on the lip, but no hose, and no exit with a thru hull like the port locker has. But I know water drains out.
Attached Thumbnails
Click image for larger version

Name:	20180520_185756.jpg
Views:	38
Size:	409.0 KB
ID:	170237  
jbinbi is offline   Reply With Quote
Old 25-05-2018, 15:54   #2
Registered User

Join Date: Apr 2012
Location: Winter Germany, Summer Med
Boat: Lagoon 380 S2
Posts: 1,443
Re: 380 S2 Holding tank vent location and other questions

On our 4 cabin layout the vent is at the hull side, 20cm above the waterline next to the holding tank.

our front lockers are just the same. Both lockers drain through simple holes in the bridge deck (hidden under clamshell covers).
rabbi is offline   Reply With Quote
Reply

Tags
holding tank

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Fuel tank vent location bauer965 Plumbing Systems and Fixtures 1 10-01-2016 16:45
Holding Tank Holding Tank Leaff Construction, Maintenance & Refit 17 01-07-2012 05:12
Need to cut a hole in my boat (holding tank vent) rebel heart Construction, Maintenance & Refit 9 14-10-2007 19:48



Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -7. The time now is 03:18.


Google+
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2018, vBulletin Solutions, Inc.

ShowCase vBulletin Plugins by Drive Thru Online, Inc.