Cruisers Forum
 


Join CruisersForum Today

 
 
Thread Tools Search this Thread Rate Thread Display Modes
Old 07-06-2011, 16:00   #1
Registered User

Join Date: Sep 2010
Location: Sonoma, CA
Boat: Morgan 382...38'-4"...Pisces Moon
Posts: 171
Teak Lumber

I have 35 to 40 board feet of teak boards that are left overs from a finish carpentry job and are in beautiful shape. Lengths are 4 to 10' and widths are 3 1/2" to 8". I have several pieces of 5/4 stock as well. I prefer to sell in full or half lots but let me know your needs.
Priced at $24/board foot. $50 flat rate shipping and packaging for full or half lot.
thesparrow is offline  
Old 07-06-2011, 16:15   #2
Senior Cruiser
 
skipmac's Avatar

Cruisers Forum Supporter

Join Date: Oct 2007
Location: 29 49.16 N 82 25.82 W
Boat: Pearson 422
Posts: 13,688
Re: Teak Lumber

Thickness?
__________________
The water is always bluer on the other side of the ocean.

Sometimes it's necessary to state the obvious for the benefit of the oblivious.

Rust is the poor man's Loctite.
skipmac is online now  
Old 07-06-2011, 16:43   #3
Registered User

Join Date: Sep 2010
Location: Sonoma, CA
Boat: Morgan 382...38'-4"...Pisces Moon
Posts: 171
Re: Teak Lumber

Hi Skip,

The thickness is principally 4/4 or 3/4" actual. Several pieces of 7/8 and
1" thick actual....Let me know what your needs are and I'll tell you my best match and find out if it's economical to ship from the wild west. There are roughly 14 to 15 pieces. I'll put a nice finish sanding on them in the shop before sending them out.

Hope you're well and the boat is coming along...The USVI thing came up and seems to have dropped once again....go figure....I'll drop you a pm...or call me if you want to talk directly about this stock and your project.
thesparrow is offline  
 

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Teak lumber Idylles15.5 Construction, Maintenance & Refit 14 21-11-2008 17:09
Need lumber, mast, fiberglass - good prices and/or advise texwards Construction, Maintenance & Refit 1 21-11-2008 17:03
Kudos to Condon Lumber! hellosailor Construction, Maintenance & Refit 2 22-06-2006 03:40



Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -7. The time now is 06:56.


Google+
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2019, vBulletin Solutions, Inc.

ShowCase vBulletin Plugins by Drive Thru Online, Inc.